Ricoh 170 / 180 manual Counters, Next Operation

copy mode).

COUNTERS

These counters will help if you wish to keep a regular check on how many pages your machine has sent, received and copied.

❐ TX (Transmit) Counter: The number of pages that your machine has sent.

❐ RX (Receive) Counter: The number of pages that your machine has received.

❐ Scan Counter: The number of pages that your machine has scanned (includes

❐ PRINT Counter: The number of pages that your machine has printed (includes

copy mode and report/list printing).			21911
1.	Press the Function key and
		TXR	:034407
	6,2,2,2,2,8,2 using the ten keypad, then
	press the Yes key. First, the Transmis-		05
	sion and Reception counters appear.
2.	Press the Yes key, and the Scan and
	Print counter will appear.	PRITSCAN	:022796

3.When you have finished: Press the Yes key and the Function key.

DOING TWO THINGS AT ONCE (Dual Access) (Type I Only)

Dual Access means that even if the machine is already carrying out a task, you may be able to operate the machine. For instance, if your machine is currently receiving a long fax message but you want to send a message and go back to your desk without having to wait by the machine, you can place your message in the feeder, select the required transmission features , dial the number, and press the Start key. Your message will be scanned and stored to memory while the machine is still receiving. This means that you can take your fax back to your desk before it is actually sent. However, to be sure whether your transmission was successful or not, keep an eye open for Error Reports (or check the TCR).The following table shows which features can operate simultaneously on your machine.

					Next Operation
Job Currently in progress		1.	2.	3.		4.	5.	6.	7.	8.
1.	Storing to Memory		"			"			"
2.	Printing from Memory
3.	Copying	$				$		"		"
4. Printing an Automatic
	Report
5.	Immediate Transmission	$
6.	Memory Transmission			"					$	$
				$
7.	Receiving and Printing a	"	$	"		$	$	$	$
	Fax
8.	Receiving a Fax to
	Memory

106