Ricoh 170 / 180 manual Programming Groups Type I Only, Erasing a Speed Dial, Programming a Group

There are 3 groups, from 1 to 3.

8.When you have entered the new label: PRINTllSTORINGLISTOFTENj/SEARCHUSEDKPAD/NUMBERSkj/k

Press the Yes key. If the display is not

	as opposite, press the Yes key again.
9.	Either:
	❐ Edit another: Go to step 2.
	❐ Print a list of Speed Dial Numbers: Press the jkey.
	❐ Finish : Press the Function key.	ll		Y/	k
Erasing a Speed Dial
1.	Press the Function key and 3,2 using
	the ten keypad, then press the Yes key.	PRINTLISTj/SEARCHj
	❐ At this time, you can print a Speed Dial List if you
		01	CHANGE?Y/		k
	press the jkey, then press the Start key.
2.	Input the Speed Dial Code that you
	wish to erase. Example: Speed Dial 01	ATLANTABRANCCH
	❐ If the wrong number is displayed, use the jand k
	keys to scroll through the Speed Dial keys on the
	screen.
3.Press the Yes key .
		N22623104701 lllllllllKPAD/Y/N
4.	Erase the number: Press the No key	ll		Y/jk
	and then press the Yes key.	PRINTLISTj/SEARCHk

5Either:

❐Program another: Go to step 2.

❐Print a list of Speed Dial Numbers: Press the jkey.

❐Finish : Press the Function key.

INSTALLTING THE MACHINE

Programming Groups (Type I Only)

Groups allow you to combine some numbers into one group, for easy sequential transmission to all the numbers in that group. These numbers can be selected from those already stored in Quick Dial keys or Speed Dial codes, or you can select other numbers by entering them using the ten keypad.

You can also store a label with each group. This label will be displayed when you select the Group.

NOTE: Up to 10 numbers can be stored in a group.

Programming a Group		l	1-3/jk
1.	Press the Function Key and 3,3 using
	the ten keypad, then press the Yes key.	PINTLISTGOUPj/SEARCHk
	❐ At this time, you can print a Group Dial List, if you
		1	Y/N
	press the jkey, then press the Start key.
2.	Enter the group number using the ten
	key pad, then press the Yes key.	PROGRAMQUICK?
	❐

31