4.Use the j and the k keys to switch this feature on or off.

5.Press the Yes key to store your setting, then press the Function key.

NOTIFYING

Y/j k

kON

OFF

When you go out, you can hear the received voice messages from your machine using this feature. This feature will work only if the following conditions have been met.

When you use this feature from another place, You must be connected to a telephone line that can accept DTMF (tone dial) signals.

Your machine’s remote ID code must be programmed.

Remote control must be switched on.

As a new machine has a Remote ID of 0000 when it leaves factory, we recommend that you store a new Remote ID immediately.

1.Press the Function key and 6,2,2,2,2,6,1 using ten keypad, then press the Yes key.

2.Press the k key until the screen is as shown opposite.

3.Press the Yes key.

4.Press the Yes key and the No key to clear.

5.Input the Remote ID that you wish to use.

Example: 0826 , press 0,8,2,6 using the ten keypad.

6.Press the Yes key .

7.Finish: Press the Function key

Y/NEXTk

SET PAGING TEL NO.

Y/NEXTk

SET REMOTE ID

REMOTE CHANGE?

Y/N

0000

 

 

 

REMOTE ID

KPAD

llll

 

 

 

REMOTE ID

Y/N

0826

 

1.Press the Function key and 6,2,2,2,2,6,2 using the ten keypad. Then press the Yes key.

2.Press the k key until "REMOTE FUNC.ON/OFF" is displayed.

Y/NEXT k

SELECT LINE

Y/NEXT k

REMOTE FUNC.ON/OFF

Page 135
Image 135
Ricoh 170 / 180 manual SET Remote ID Remote CHANGE?