Anritsu ML2430A operation manual Rackmount Side Bracket MULTI-FIT

RACK MOUNTING INSTALLATION

49415 RACKMOUNT SIDE BRACKET (MULTI-FIT).

USE THIS BRACKET WHEN FITTING A HP34401A

905-63 x 2

NOTE:

FIT COMPLETED ASSEMBLY TO RACK USING DECORATIVE SCREW 900-821 X4 AND SPEED NUT 790-319

X4 IN 4 CORNER POSITIONS AS SHOWN

	900-345
905-68	x 16
	C37279
x 16
	RACKMOUNT BRACKET
	CENTER INNER REAR

49413

RACKMOUNT BRACKET

900-795CENTER REAR x 4

C37275

RACKMOUNT

BRACKET

CENTER FRONT

905-69

905-63 x 4 x 4

USE THESE FIXINGS WHEN FITTING A HP 34401A TO A ML2430A OR MF2412A

C37277
RACKMOUNT	49439 X2
BRACKET	SPACER PLATE
CENTER INNER	USE ON A HP 34401A
FRONT	ONLY, IN 2 POSITIONS
	WHEN FITTING TO A	783-1055
	ML2430A OR MF2412A.	HANDLE
	USE ALSO WITH SIDE	X2	C37276
	BRACKET 49415
			RACKMOUNT SIDE

BRACKET

900-807 X2

900-806 X2

USE THESE FIXINGS WHEN FITTING A MF2412A COUNTER TO A ML2430A

POWER METER

900-103 X2

900-807 X2

USE THESE FIXINGS WHEN FITTING A HP34401A MULTIMETER TO A ML2430A

POWER METER

C41449

RACKMOUNT BRACKET REAR SUPPORT

X2

USE THESE BRACKETS WHEN FITTING A ML2430A TO ANOTHER ML2430A

POWER METER.

The procedure for fitting a ML2430A to a HP34401A Multimeter is as fol- lows:

1.Fit to the ML2430A Power Meter front brackets C37276, C37275 and rear bracket C41449 using 6 screws 905-68 and 6 washers 900-345. Do not tighten fully at this stage, only enough to allow the bracket to slide to its maximum position.

2.Fit the center rear bracket 49413 using 2 screws 905-63. (See max. torque settings page 2-6).

3.Fit to the HP34401A spacer plate 49439 in 2 positions with front brack- ets C37277 and 49415 using 4 screws 905-63. (See max. torque settings page 2-6).

4.Offer up the HP34401A to the ML2430A unit ensuring the front bracket fixing holes ofboth units are in line. Slide the center rear bracket 49413 forward till it makes contact with the rear face of the HP34401A.

5.Gently remove the HP34401A unit and tighten the 49413 bracket fixings in its new position. (See max. torque settings page 2-6).

2-8 ML2430A OM