Anritsu ML2430A Val 150.0 to +250.0, Time mode can also use dB V or dBmV, Mon command

ML24XXA NATIVE COMMANDS GPIB OPERATION

	val:	–150.0 to +250.0
	Remarks:	It is not necessary to specify units as the displayed units are always as-
		sumed. Profile and Source Sweep modes always use dBm, but Power vs.
		Time mode can also use dB￿V or dBmV.
	Query:	GRYT?
	Returned
	String:	GRYT <val>
GT0	Set to ignore the Group Execute Trigger (GET) GPIB com-
			GPIB TRIGGER
	mon command
	Syntax:	GT0
	Remarks:	The ML2430A Series will ignore the GET command or a *TRG.
	Related
	Commands:	*TRG, Group Execute Trigger (GET), GT1, GT2
GT1	Set 'GET' command to TR1 type (immediate) trigger
			GPIB TRIGGER
	Syntax:	GT1
	Remarks:	When the ML2430A Series receives a GET or *TRG command, the system
		will perform a TR1-type trigger command.
	Related
	Commands:	*TRG, Group Execute Trigger (GET), GT0, GT2
GT2	Set 'GET' command to TR2 type (settling delay) trigger
			GPIB TRIGGER
	Syntax:	GT2
	Remarks:	When the ML2430A Series receives a GET or *TRG command, the system
		will perform a TR2-type trigger command.
	Related
	Commands:	*TRG, Group Execute Trigger (GET), GT0, GT1
GTARM	Set profile trigger arming
				TRIGGER
	Syntax:	GTARM <state>
	state:	ON or OFF

6-46 ML2430A OM