Anritsu ML2430A operation manual ML24XXA Quick, Reference

		Appendix B
		GPIB Quick Reference
B-1	INTRODUCTION	This appendix contains quick reference tables for all supported com-
		mands. Native mode commands are sorted by functional group. For de-
		tailed command explanations, refer to the page references listed.
B-2	ML24XXA QUICK	The following tables reference ML24XXA (native) mode commands. A
	REFERENCE	command followed by a (?) indicates that there is an equivalent query
		command for that function (see Table B-13).

Table B-1.BNC Functional Group Commands
Command	Function	Page
IBBLP	Blanking active TTL level	6-41
OBACM(?)	AC modulation output polarity	6-57
OBCH(?)	BNC output port channel configuration	6-57
OBDSP(?)	BNC analog output display stop value	6-45
OBDST(?)	BNC analog output display start value	6-58
OBMD(?)	BNC output mode select	6-59
OBPL(?)	BNC pass/fail pass level	6-59
OBVSP(?)	BNC analog output stop voltage scale	6-59
OBVST(?)	BNC analog output start voltage scale	6-60
OBZL(?)	BNC RF blanking output level	6-60
Table B-2.Calibration Functional Group Commands
Command	Function	Page
CAL	Calibrate the selected sensor to 0 dBm	6-21
RFCAL(?)	Turn RF reference calibrator ON or OFF	6-67
VZERO	Zero the BNC input connector	6-82
ZERO	Zero the sensor	6-82

ML2430A OM B-1