8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*
(120/240 VOLT)
NAMEPLATE | EXTENSION CORD | ||||||
| LENGTH |
| |||||
AMPERES |
|
| |||||
25’ | 50’ | 75’ | 100’ | 150’ | |||
(at full load) | |||||||
|
|
|
|
| |||
|
|
|
|
|
| ||
0 – 2.0 | 18 | 18 | 18 | 18 | 16 | ||
2.1 | – 3.4 | 18 | 18 | 18 | 16 | 14 | |
3.5 | – 5.0 | 18 | 18 | 16 | 14 | 12 | |
5.1 | – 7.0 | 18 | 16 | 14 | 12 | 12 | |
7.1 – 12.0 | 18 | 14 | 12 | 10 | - | ||
12.1 | – 16.0 | 14 | 12 | 10 | - | - | |
16.1 | – 20.0 | 12 | 10 | - | - | - | |
TABLE A | * Based on limiting the line | ||||||
voltage drop to five volts at |
150% of the rated amperes.
|
|
|
|
|
|
|
|
|
| Symbology | |
|
|
|
|
| |
|
|
|
| Double Insulated | |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Canadian Standards Association | |
|
|
|
|
| |
|
|
|
| Underwriters Laboratories, Inc. | |
|
|
|
|
| |
| V~ | Volts Alternating Current | |||
|
| A | Amperes | ||
|
|
|
| ||
|
|
|
|
| |
| n0 xxxx/min. | No Load Revolutions per Minute | |||
| (RPM) | ||||
|
|
|
|
|
|
Specifications
| 120 V~ / 60 Hz | |
Electrical | 1200 Watts | |
10 Amp Motor | ||
Requirements | ||
Power Switch Type: ON/OFF | ||
| ||
| Power Plug: 3 Prong, Grounded | |
Tank Capacity | 13 Gallons | |
|
| |
| Stainless Steel Tank / Safety | |
Features | Float / | |
| Cord & Accessories | |
| Filter Cartridge / Foam Filter / | |
Accessories | Dust Bag / Telescopic Suction | |
Tube / Wet & Dry Brush / Crevice | ||
| ||
| Nozzle / Furniture Brush |
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
OPERATING Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
WARNING To prevent serious
injury from accidental operation:
Turn the Power Switch of the Wet/Dry Vacuum to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
SKU 97677 | For technical questions, please call | Page 7 |