Chicago Electric 97677 manual Troubleshooting, Please Read The Following Carefully

Troubleshooting

Problem		Possible Causes		Likely Solutions
Vacuum will not	1.	No power at outlet.	1.	Check power at outlet.
start.	2.	Cord not connected.	2.	Check that cord is plugged in.
	3.	On/Off switch is not turned On.	3.	Turn On the switch.
When dry	1.	Cartridge Filter is clogged or Tank is	1.	Turn off Vacuum, and disconnect the unit from
vacuuming, Motor		full.		its electrical outlet. Then clean out Cartridge
becomes labored.				Filter and/or Tank.
When wet	1.	Tank is full of water.	1.	Turn off Vacuum, and disconnect the unit from
vacuuming, unit				its electrical outlet. Then empty the Tank of
automatically stops				dirty water.
vacuuming.
Suction is poor.	1.	Insufficient air flow.	1.	Adjust Air Flow Adjusting Knob for greater
				suction.
	2.	Insufficient air flow.	2.	Make sure all connections are secure.
	3.	Clogged Hose and/or accessories.	3.	Clean out Hose and accessories.
	4.	Inspect the filters.	4.	Clean/Replace the filters.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

PLEASE READ THE FOLLOWING CAREFULLY

The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.

SKU 97677 For technical questions, please call 1-800-444-3353. Page 12