Case of wired remote controller RBC-AMT31E

7-3. Troubleshooting by Check Display on Remote Controller

In case of wired remote controller (RBC-AMT31E)

1. Confirmation and check

When a trouble occurred on the air conditioner, the check code and the indoor unit No. are displayed on the display section of the remote controller.

The check code is displayed while the air condi- tioner operates.

Check code

If the display disappeared, operate the air conditioner and check the error based upon the following “Confirmation of error history”.

CODE No.

UNIT No.

R.C. No.

Indoor unit No. in which an error occurred

2.Confirmation of error history

When a trouble occurred on the air conditioner, the error history can be confirmed with the following procedure.

(Up to 4 error histories are stored in memory.)

This history can be confirmed from either operat- ing status or stop status.

TEMP.		ON / OFF
TIMER SET	FAN	MODE
TIME	SWING/FIX	VENT
FILTER
RESET TEST SET CL	UNIT

Procedure			Description

	When pushing SET and TEST buttons simultaneously for 4 seconds or more, the below display appears.
	If [Service Check] is displayed, the mode enters in the error history mode.
1	• [01: Error history order] is displayed in code number window.				CODE No.
					CODE No.

	• [Check Code] is displayed in check code window.			UNIT No.
				UNIT No.
	• [Indoor unit address with error] is displayed in UNIT No.			R.C. No.


	Every pushing temp. set	/	buttons, the error histories stored in the memory are displayed in
	order.
2	The numbers in item code indicates item code [01] (Latest) to [04] (Oldest).
2	CAUTION
	CAUTION

Do not push [CL] button because all the error histories of the indoor unit will be deleted.

3	After confirmation, push TEST button to return to the usual display.

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications

The Toshiba MMU-AP series, consisting of models MMU-AP0121MH, MMU-AP0151MH, MMU-AP0091MH, MMU-AP0071MH, and MMU-AP0181MH, represents a significant advancement in the realm of power management and energy efficiency for a variety of applications. These modules are designed to optimize performance while ensuring minimal energy consumption, making them suitable for both commercial and industrial uses.

One of the standout features of the MMU-AP series is its intelligent power management technology. This feature allows for adaptive energy distribution based on real-time demands. By leveraging precise control algorithms, the modules can adjust their output to match the specific requirements of connected devices, ultimately leading to reduced power loss and increased efficiency. This adaptability not only benefits end-users by lowering operational costs but also contributes to a greener environment by minimizing waste.

The versatility of the MMU-AP series is evident in its wide range of operational capabilities. These power modules are designed to work effectively in various voltage levels and load conditions. With input voltage ranges suitable for standard industrial environments, they can easily be integrated into existing systems, enhancing overall functionality without requiring extensive modifications.

Moreover, the compact design of the MMU-AP modules is another notable characteristic. Their size and light weight facilitate easier installation and integration into tight spaces, making them ideal for applications where real estate is a premium. This compact profile does not compromise performance, as these modules are engineered to deliver robust power output while maintaining thermal efficiency.

In terms of reliability, the MMU-AP series is built with high-grade components that withstand harsh operating conditions. With features such as over-voltage protection, short-circuit protection, and thermal shutdown capabilities, users can trust that their equipment would operate safely and efficiently, thereby extending the lifespan of both the power modules and the devices they serve.

Finally, Toshiba’s commitment to innovation ensures that the MMU-AP series incorporates cutting-edge technology. The series supports communication protocols that enable seamless integration with smart systems, paving the way for advanced monitoring and control functions. This levels up the user experience, providing insights into performance and diagnostics that are crucial for uptime and reliability in demanding environments.

In conclusion, the Toshiba MMU-AP series offers a blend of efficiency, adaptability, and advanced technology, making it a valuable asset for various industrial and commercial applications. Its intelligent design and robust features ensure that users can optimize energy use while maintaining high performance and reliability.

Toshiba MMU-AP0121MH Troubleshooting by Check Display on Remote Controller, Procedure Description

Models: MMU-AP0181MH MMU-AP0071MH MMU-AP0091MH MMU-AP0151MH MMU-AP0121MH