Cautions when servicing for compressor

1. Removing wires of both compressors check output of the inverter as described below.

How to check inverter output

1.Turn off the power supply.

2.Remove the compressor lead cables from the compressors. (Be sure to remove lead cables of both compressors.)

3.Turn on the power supply and start cooling or heating operation.

In this time, pay attention to touch the fasten receptacle terminal lug of the compressor leads so that they do not contact with other fasten receptacle terminal lug or other position (unit cabinet, etc.).

4.Check output voltage of compressor lead cable at inverter side.

When the output voltage does not satisfy the criteria in the following table, replace IPDU P.C. board.

No.

Measured position

Criteria

 

 

 

1

Between Red and White

400 V to 650 V

 

 

 

2

Between White and Black

400 V to 650 V

 

 

 

3

Between Black and Red

400 V to 650 V

 

 

 

*After checking the output, when connecting the compressor lead again to the compressor terminal, check surely there is no distortion on the fasten terminal lug. If it is loosened, caulk it with pinchers, etc and then connect lead to the terminal.

How to check resistance of compressor winding

1.Turn off the power supply.

2.Remove the compressor lead cables from the compressors.

In each compressor, check the winding resistance between phases and resistance of the outdoor cabinet using a tester.

Is not it earthed?

Normal if 10Mor more are measured

Is not shorted between windings?

Normal if 0.7to 0.9are measured (Use a precise digital tester.)

How to check the outdoor fan motor

1.Turn off the power supply.

2.Take off three connectors (U.V.W) from the fan IPDU P.C. board.

3.Turn the fan with hands. If the fan does not turn, it is a fan motor error (Lock). Replace the fan motor.

If the fan turns, measure the winding resistance between the phases of the connector (Motor winding) with a tester. If 13 to 33are measured, it is normal. (Use a digital tester.)

64

Page 64
Image 64
Toshiba MMU-AP0121MH, MMU-AP0181MH How to check inverter output, How to check resistance of compressor winding

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications

The Toshiba MMU-AP series, consisting of models MMU-AP0121MH, MMU-AP0151MH, MMU-AP0091MH, MMU-AP0071MH, and MMU-AP0181MH, represents a significant advancement in the realm of power management and energy efficiency for a variety of applications. These modules are designed to optimize performance while ensuring minimal energy consumption, making them suitable for both commercial and industrial uses.

One of the standout features of the MMU-AP series is its intelligent power management technology. This feature allows for adaptive energy distribution based on real-time demands. By leveraging precise control algorithms, the modules can adjust their output to match the specific requirements of connected devices, ultimately leading to reduced power loss and increased efficiency. This adaptability not only benefits end-users by lowering operational costs but also contributes to a greener environment by minimizing waste.

The versatility of the MMU-AP series is evident in its wide range of operational capabilities. These power modules are designed to work effectively in various voltage levels and load conditions. With input voltage ranges suitable for standard industrial environments, they can easily be integrated into existing systems, enhancing overall functionality without requiring extensive modifications.

Moreover, the compact design of the MMU-AP modules is another notable characteristic. Their size and light weight facilitate easier installation and integration into tight spaces, making them ideal for applications where real estate is a premium. This compact profile does not compromise performance, as these modules are engineered to deliver robust power output while maintaining thermal efficiency.

In terms of reliability, the MMU-AP series is built with high-grade components that withstand harsh operating conditions. With features such as over-voltage protection, short-circuit protection, and thermal shutdown capabilities, users can trust that their equipment would operate safely and efficiently, thereby extending the lifespan of both the power modules and the devices they serve.

Finally, Toshiba’s commitment to innovation ensures that the MMU-AP series incorporates cutting-edge technology. The series supports communication protocols that enable seamless integration with smart systems, paving the way for advanced monitoring and control functions. This levels up the user experience, providing insights into performance and diagnostics that are crucial for uptime and reliability in demanding environments.

In conclusion, the Toshiba MMU-AP series offers a blend of efficiency, adaptability, and advanced technology, making it a valuable asset for various industrial and commercial applications. Its intelligent design and robust features ensure that users can optimize energy use while maintaining high performance and reliability.