Outdoor 7-segment display Check code name

	Check code
			Detected
Main	Outdoor 7-segment display		Detected	Check code name	Status		Error detection condition		Check item (position)
Main	Outdoor 7-segment display		position	Check code name	Status		Error detection condition		Check item (position)
remote			position
remote
controller	Check code	Auxiliary code

P22	P22	0: IGBT shortage	FAN-IPDU	Outdoor fan IPDU error	All stop	(Auxiliary code: 0)		• Check fan motor. (Interphase short-circuit)
		1: Position detection circuit error				•	Short-circuit current was detected at start time.	•	Check fan IPDU error.
		3: Motor lock error				•	Short-circuit current was detected when
		4: Motor current error detection					checking IGBT short-circuit before start time.
		4: Motor current error detection
		C: TH sensor temp. error			All stop	(Auxiliary code: 1)		•	Check fan IPDU error.
		D: TH sensor error			All stop	(Auxiliary code: 1)		•	Check fan IPDU error.
		D: TH sensor error				•	The standard value of detection circuit of fan
		E: Vdc error				•	The standard value of detection circuit of fan
		E: Vdc error					IPDU current fluctuated at start time.

					All stop	(Auxiliary code: 3)		•	Check fan motor. (Lock, phase missing)
						• Abnormal current was detected within 30		• Check cause of abnormal overload at start time.
							seconds after start time.	• Check connection of connector to fan motor.
								• Check connection of connector to fan motor.

					All stop	(Auxiliary code: 4)		•	Check power supply voltage.
						• Short-circuit current was detected when		• Check fan IPDU error.
							2 seconds or more passed after start time.
						• Over-current was detected when 30 seconds
							or more passed after start time.

					All stop	(Auxiliary code: C)		•	Check outdoor fan system.
						• Heat sink sensor (TH) of fan IPDU detected		• Check fan IPDU error.
							95°C error.	• Check fixation between fan IPDU and heat sink.
								• Check fixation between fan IPDU and heat sink.

					All stop	(Auxiliary code: D)		•	Check fan IPDU error.
						• Heat sink sensor (TH) of fan IPDU detected
							short-circuiting or open.

					All stop	(Auxiliary code: E)		•	Check input power supply voltage of the fan IPDU.
						• Input power supply voltage of the fan IPDU		• Check power supply P.C. board error of the fan IPDU.
							over the setup value was detected.	•	Check error of external electrolytic condenser.
						• Input power supply terminal of the fan IPDU		•	Check error of external electrolytic condenser.
						• Input power supply terminal of the fan IPDU
							was unconnected.
						• Power supply P.C. board error of the fan IPDU

P26	P26	01: Compressor 1 side	IPDU	G-Tr short-circuit	All stop	Instantaneous over-current was detected when		• Check connector connection and wiring on IPDU P.C. board.
		02: Compressor 2 side		protection error		compressor started.		• Check compressor error and defect of compressor coil.
		02: Compressor 2 side						• Check compressor error and defect of compressor coil.
								• Check outdoor P.C. board (IPDU) error.

P29	P29	01: Compressor 1 side	IPDU	Compressor position	All stop	Position was not normally detected.		• Check connector connection and wiring.
		02: Compressor 2 side		detection circuit error				• Check compressor error and defect of compressor coil.
		02: Compressor 2 side						• Check compressor error and defect of compressor coil.
								• Check P.C. board (IPDU) error.

P31	—	—	Indoor	Other indoor error	Corresponding	E07/L07/L03/L08 was detected when other		• Check indoor P.C. board.
				(Group follower unit error)	unit only stops.	indoor unit in the group was defective.

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications

The Toshiba MMU-AP series, consisting of models MMU-AP0121MH, MMU-AP0151MH, MMU-AP0091MH, MMU-AP0071MH, and MMU-AP0181MH, represents a significant advancement in the realm of power management and energy efficiency for a variety of applications. These modules are designed to optimize performance while ensuring minimal energy consumption, making them suitable for both commercial and industrial uses.

One of the standout features of the MMU-AP series is its intelligent power management technology. This feature allows for adaptive energy distribution based on real-time demands. By leveraging precise control algorithms, the modules can adjust their output to match the specific requirements of connected devices, ultimately leading to reduced power loss and increased efficiency. This adaptability not only benefits end-users by lowering operational costs but also contributes to a greener environment by minimizing waste.

The versatility of the MMU-AP series is evident in its wide range of operational capabilities. These power modules are designed to work effectively in various voltage levels and load conditions. With input voltage ranges suitable for standard industrial environments, they can easily be integrated into existing systems, enhancing overall functionality without requiring extensive modifications.

Moreover, the compact design of the MMU-AP modules is another notable characteristic. Their size and light weight facilitate easier installation and integration into tight spaces, making them ideal for applications where real estate is a premium. This compact profile does not compromise performance, as these modules are engineered to deliver robust power output while maintaining thermal efficiency.

In terms of reliability, the MMU-AP series is built with high-grade components that withstand harsh operating conditions. With features such as over-voltage protection, short-circuit protection, and thermal shutdown capabilities, users can trust that their equipment would operate safely and efficiently, thereby extending the lifespan of both the power modules and the devices they serve.

Finally, Toshiba’s commitment to innovation ensures that the MMU-AP series incorporates cutting-edge technology. The series supports communication protocols that enable seamless integration with smart systems, paving the way for advanced monitoring and control functions. This levels up the user experience, providing insights into performance and diagnostics that are crucial for uptime and reliability in demanding environments.

In conclusion, the Toshiba MMU-AP series offers a blend of efficiency, adaptability, and advanced technology, making it a valuable asset for various industrial and commercial applications. Its intelligent design and robust features ensure that users can optimize energy use while maintaining high performance and reliability.

Toshiba MMU-AP0091MH, MMU-AP0181MH, MMU-AP0151MH Outdoor 7-segment display Check code name

Models: MMU-AP0181MH MMU-AP0071MH MMU-AP0091MH MMU-AP0151MH MMU-AP0121MH

Check code

Detected

Outdoor 7-segment display

Check code name

Error detection condition

Check item (position)

remote

Check code

G-Tr short-circuit

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications