7. TROUBLESHOOTING

7-1. Troubleshooting Summary

1. Before troubleshooting

1)Applied models

Q S-MMS Multi type models

Indoor unit: MMX-APXXX,

Outdoor unit: MMY-MAPXXXHT8, MMY-MAPXXXT7

RSuper Heat Recovery Multi type models

Indoor unit: MMX-APXXX,

Outdoor unit: MMY-MAPXXXFT8

SMini-S-MMS Multi type models Indoor unit: MMX-APXXX,

Outdoor unit: MCY-MAPXXXHT, MCY-MAPXXXHT2D

2)Required tools / measuring devices

• Screwdrivers (Philips, Minus), spanner, radio pinchers, nipper, push pin for reset switch, etc.

• Tester, thermometer, pressure gauge, etc.

3)Confirmation before check (The following items are not troubles.)

No.

Operation

 

Check items

 

 

 

1

Compressor does not operate.

• Is not delayed for 3 minutes? (3 minutes after compressor-OFF)

 

 

• Is not thermostat OFF?

 

 

•

Is not the fan operating or timer?

 

 

• Is not the system initially communicating?

 

 

 

Heating operation cannot be performed under condition of outside tempera-

 

 

 

ture 21°C or higher.

 

 

 

Cooling operation cannot be performed under condition of outside tempera-

 

 

 

ture –5°C or lower.

 

 

 

2

Indoor fan does not work.

• Is not the cold draft prevention being controlled in heating operation?

 

 

 

3

Outdoor fan does not rotate, or

• Is not low cooling operation being controlled?

 

fan speed changes.

• Is not a defrost operation being performed?

 

 

 

 

 

 

4

Indoor fan does not stop.

•

Is not after-heat elimination operation being controlled after heating opera-

 

 

 

tion?

 

 

 

5

Start/stop operation on remote

• Is not auxiliary unit or remote control being operated?

 

controller is unavailable.

 

 

 

 

 

 

6

——

•

Is connecting wire of indoor unit or remote controller correct?

 

 

 

 

2.Troubleshooting procedure

When a trouble occurred, advance the check operation in the following procedure.

Trouble

Check the check display on the interface P.C. board of the outdoor unit.

Check position or part

in which trouble occurred.

NOTE) While a check operation is performed, a malfunction of the microprocessor may be caused due to condition of the power supply or the external noise. If there is any noise source, change wires of the remote controller and signal wires to shield wires.

44

Page 43 Page 45
Page 44
Image 44
Toshiba MMU-AP0121MH, MMU-AP0181MH Troubleshooting Summary, Before troubleshooting, Troubleshooting procedure
Page 43 Page 45

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications

The Toshiba MMU-AP series, consisting of models MMU-AP0121MH, MMU-AP0151MH, MMU-AP0091MH, MMU-AP0071MH, and MMU-AP0181MH, represents a significant advancement in the realm of power management and energy efficiency for a variety of applications. These modules are designed to optimize performance while ensuring minimal energy consumption, making them suitable for both commercial and industrial uses.

One of the standout features of the MMU-AP series is its intelligent power management technology. This feature allows for adaptive energy distribution based on real-time demands. By leveraging precise control algorithms, the modules can adjust their output to match the specific requirements of connected devices, ultimately leading to reduced power loss and increased efficiency. This adaptability not only benefits end-users by lowering operational costs but also contributes to a greener environment by minimizing waste.

The versatility of the MMU-AP series is evident in its wide range of operational capabilities. These power modules are designed to work effectively in various voltage levels and load conditions. With input voltage ranges suitable for standard industrial environments, they can easily be integrated into existing systems, enhancing overall functionality without requiring extensive modifications.

Moreover, the compact design of the MMU-AP modules is another notable characteristic. Their size and light weight facilitate easier installation and integration into tight spaces, making them ideal for applications where real estate is a premium. This compact profile does not compromise performance, as these modules are engineered to deliver robust power output while maintaining thermal efficiency.

In terms of reliability, the MMU-AP series is built with high-grade components that withstand harsh operating conditions. With features such as over-voltage protection, short-circuit protection, and thermal shutdown capabilities, users can trust that their equipment would operate safely and efficiently, thereby extending the lifespan of both the power modules and the devices they serve.

Finally, Toshiba’s commitment to innovation ensures that the MMU-AP series incorporates cutting-edge technology. The series supports communication protocols that enable seamless integration with smart systems, paving the way for advanced monitoring and control functions. This levels up the user experience, providing insights into performance and diagnostics that are crucial for uptime and reliability in demanding environments.

In conclusion, the Toshiba MMU-AP series offers a blend of efficiency, adaptability, and advanced technology, making it a valuable asset for various industrial and commercial applications. Its intelligent design and robust features ensure that users can optimize energy use while maintaining high performance and reliability.
Top Page Image Contents