RECALLING MEASUREMENTS STORED IN MEMORY
To view a history of User 1’s records, press 
To view a history of User 2’s records, press 
NOTE
•The most recent record (1) is shown first. Each new measurement is assigned to the first (1) record. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (30) is dropped from the list.
•Press the corresponding user button again ( 
or 
) to see additional records.
•Press and hold the corresponding user button to auto- advance to additional records.
•The date and time of measurements taken are shown with each record.
•Memory records will be kept even when the batteries become exhausted and are replaced.
DELETING A MEASUREMENT RECORD FROM MEMORY
You have the option of deleting your latest measurement record or entire measurement history. This is useful if measurements have not been accurately recorded and need to be recorded again.
DELETING A SINGLE RECORD
1.Press 
or 
to recall the latest measurement record for User 1 or User 2.
2.Press and hold SET until the LCD shows “dEL OnE”.
3.Press SET. First record will be displayed on LCD screen.
4.Press respective user button ( 
/
) to scroll through records and select the record to be deleted.
5.Press and hold SET to delete record.
NOTE If you decide to abort the delete action instead:
FOR | ACTION |
| RETURN TO SCREEN | |
|
|
| DISPLAY | |
|
|
|
|
|
User 1 record | Press | twice | User 1 records | |
|
|
| displayed | |
|
|
|
|
|
User 2 record | Press | once | User 2 records | |
|
|
| displayed | |
|
|
|
|
|
6.“dEL OnE” will be displayed on LCD screen. Press and hold SET to confirm.
“dEL dOnE” indicates successful deletion.
DELETING ALL RECORDS
1.Press 
or 
to recall the latest measurement record for User 1 or User 2.
2.Press and hold SET until the LCD shows “dEL OnE”.
3.Press 
to select option to delete all records (“dEL ALL”).
FOR | ACTION |
| RETURN TO SCREEN | |
|
|
| DISPLAY | |
|
|
|
|
|
User 1 record | Press | once | User 1 records | |
|
|
| displayed | |
|
|
|
|
|
User 2 record | Press | twice | User 2 records | |
|
|
| displayed | |
|
|
|
|
|
4.Press and hold SET for 2 seconds to delete all measurement records. After you have confirmed deleting all records, the screen shows “dEL dOnE”.
The no
no
MEM
TROUBLESHOOTING
This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the product is not operating as you think it should, check here before arranging for servicing.
Problem | Symptom | Check This | Remedy |
No | Display is | Batteries are | Replace with |
power | dim or will | exhausted | new batteries |
| not light up | Batteries are | Insert the |
|
| inserted | batteries |
|
| incorrectly | correctly |
Low | shows | Batteries | Replace |
batteries | on the | are low | with new |
| display |
| batteries |
|
| - |
|
NOTE If you decide to abort the delete action instead:
