Toshiba MMU-AP0071MH, MMU-AP0181MH 103, No. Part name Procedure, Fan guard 1. Detachment

No. Part name Procedure Remarks

7Fan guard 1. Detachment

Fan guard

1)Perform work of procedure 1 -1.

2)Take off screws fixing the fan guard.

(Ø4 × 10, [Screws for plastic molding] 4 pcs.)

NOTE)

The specification of fixing screws for the fan guard differs from those of other fixing screws.

Therefore keep them separately from other screws.

2. Attachment

1)Attach screws for fixing the fan guard.

(Ø4 × 10, [Screws for plastic molding] 4 pcs.)

4 screws

8Bell mouth 1. Detachment

1) Perform work of procedure 6 -1.	Fixing claws
	for lead wires	Bell mouth

2) Take off the lead wires of the drain pump, float switch, and fan motor from the bell mouth.

3) Take off fixing screws of the bell mouth. (Ø4 × 10, 4 pcs.)

2. Attachment

1) Mount the bell mouth with screws. (Ø4 × 10, 4 pcs.)

2) Perform wiring as original before being removed.

NOTE)
Pinch lead wire of the drain pump and float switch
with lead wire fixing claws of the bell mouth and	4 screws	Fixing claws
perform wiring along the guide.
		for lead wires

9 Turbo fan	1. Detachment	Fan motor fixing	Drawing-out port of
	1) Perform work of procedure 8 -1.	M6 nut	fan motor lead wire

2) Take off the nut (M6 nut 1 pc.) of the turbo fan.

NOTE)

Use a box wrench for attachment and detachment of the turbo fan. If using a monkey wrench etc, the other parts may be damaged in work.

2. Attachment

1) Insert the turbo fan into the fan motor so that boss of the turbo fan matches with cut surface of the fan motor, and then tighten it with nut.

NOTE)

Tightening torque of turbo fan: 5.9 ± 0.6N.m

Apply looseness-preventing agent to the nut after tightening.

Turbo fan

103