Toshiba MMU-AP0091MH, MMU-AP0181MH Operation section, Remote controller sensor, Button

Operation section

Push each button to select a desired operation.

This remote controller can operate the maximum 8 indoor units.

• The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing ON / OFF button only.

	1	7
TEMP.			ON / OFF
10	TIMER SET	FAN	MODE
2
	TIME	SWING/FIX	VENT
FILTER
RESET TEST	SET CL	UNIT
5
3

8

9

4

6

1 Air volume select button Selects the desired air volume mode.

2 Timer set button

TIMER SET button is used when the timer is set up.

3 Check button

The CHECK button is used for the check opera- tion. During normal operation, do not use this button.

4 Fan button

FAN button is used when a fan which is sold on the market or etc. is connected.

8 ON / OFF button

When the button is pushed, the operation starts, and it stops by pushing the button again.

When the operation has stopped, the operation lamp and all the displays disappear.

9 Operation select button

Selects desired operation mode.

10 Set up temperature button

Adjusts the room temperature.

Set the desired set temperature by pushing or .

5	Filter reset button
	Resets (Erases) “FILTER	” display.
6	Wind direction and Swing
	UNIT :

If the multiple indoor units are operated by only one remote controller, select the units when the air direction is adjusted.

SWING/FIX :

Set up the auto swing and angle of the flap.

7 Operation lamp

Lamp is lit during the operation. Lamp is off when stopped.

Although it flashes when operating the protection device or abnormal time.

OPTION :

Remote controller sensor

Usually the TEMP. sensor of the indoor unit senses the temperature. The temperature on the surround- ing of the remote controller can also be sensed.

For details, contact the dealer from which you have purchased the air conditioner.

•In case that one remote controller controls the multiple indoor units, the setup operation is unavailable in group control.

12