Case of installation to high ceiling | Toshiba MMU-AP0121MH guide

7 APPLICABLE CONTROLS

In case of installation to high ceiling

When the unit is to be installed at a height that exceeds the standard value, adjustment to the air volume is necessary.

• For the “Setup data” in Procedure 2 , select from the “Installable ceiling height list”.

Installable ceiling height list

Indoor unit capacity type	0071 to 0121 type				0151 type				0181 type			Setup of high ceiling

Discharge direction	4-way	3-way	2-way	4-way		3-way	2-way	4-way		3-way	2-way	Setup data

Standard (At shipment)	2.7	—	—	2.9		—	—	3.2		—	—	0000

High ceiling (2)	—	—	—	3.2		—	—	3.4		—	—	0002

High ceiling (3)	—	—	—	3.5		—	—	3.5		—	—	0003

(Unit: m)

In case of remote controller-less (Group control)

To set the unit to high ceiling operation, there is a method that requires the changing of the short plugs on the indoor P.C. board. The details are shown in the below table.

This method is only to be used where a standard wired remote controller (Group control) is not used.

∗Upon changing the high ceiling setting

• Select setting by the changing of the short plugs					• Short plug position
	on the indoor P.C. board.				(CN112, CN111, CN110 from the left)

Short plug position
			Set	Filter sold separately
			Set
			data
			data

		Short Open
CN112 CN111 CN110
			0000	Standard filter (At shipment)
			0000	Standard filter (At shipment)



CN112 CN111 CN110
			0003	High ceiling (3)
			0003	High ceiling (3)

Change of lighting time of filter sign

Depending on the conditions of the installation, the time period of the filter clean sign can be changed.

Follow to the basic operation procedure

(1 → 2 → 3 → 4 → 5 → 6 ).

•For the item code in Procedure 3 , specify [01].

•For the [Set data] in Procedure 4 , select the setup data of filter sign lighting time from the following table.

Setup data	Filter sign lighting time

0000		None

0001	150H

0002	2500H	(At shipment from factory)

0003	5000H

0004	10000H

Increased heating effect

If it is not possible to achieve satisfactory heating due to the installation environment or the structure of the room. The detected temperature can be increased. Also use a circulator, etc to circulate hot air near the ceiling.

Follow to the basic operation procedure

(1 → 2 → 3 → 4 → 5 → 6 ).

•For the item code in Procedure 3 , specify [06].

•For the set data in Procedure 4 , select the setup data of the required temperature shift value from the table below.

Setup data	Detection temp shift value

0000	No shift

0001	+1°C

0002	+2°C (At shipment from factory)

0003	+3°C

0004	+4°C

0005	+5°C

0006	+6°C

Group control

In a group control, a remote controller can control up to a maximum of 8 units.

•For cabling procedure and cables of the individual line (Identical refrigerant line) system, refer to “Electric work” in this Manual.

•Wiring between indoor units in a group is performed in the following method.

Connect the indoor units by connecting the remote controller inter-unit cables from the remote controller terminal blocks (A, B) of the indoor unit connected with a remote controller to the remote controller terminal blocks (A, B) of the other indoor unit.

(No polarity)

•For address setup, refer to the Installation Manual supplied with the outdoor unit.

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications

The Toshiba MMU-AP series, consisting of models MMU-AP0121MH, MMU-AP0151MH, MMU-AP0091MH, MMU-AP0071MH, and MMU-AP0181MH, represents a significant advancement in the realm of power management and energy efficiency for a variety of applications. These modules are designed to optimize performance while ensuring minimal energy consumption, making them suitable for both commercial and industrial uses.

One of the standout features of the MMU-AP series is its intelligent power management technology. This feature allows for adaptive energy distribution based on real-time demands. By leveraging precise control algorithms, the modules can adjust their output to match the specific requirements of connected devices, ultimately leading to reduced power loss and increased efficiency. This adaptability not only benefits end-users by lowering operational costs but also contributes to a greener environment by minimizing waste.

The versatility of the MMU-AP series is evident in its wide range of operational capabilities. These power modules are designed to work effectively in various voltage levels and load conditions. With input voltage ranges suitable for standard industrial environments, they can easily be integrated into existing systems, enhancing overall functionality without requiring extensive modifications.

Moreover, the compact design of the MMU-AP modules is another notable characteristic. Their size and light weight facilitate easier installation and integration into tight spaces, making them ideal for applications where real estate is a premium. This compact profile does not compromise performance, as these modules are engineered to deliver robust power output while maintaining thermal efficiency.

In terms of reliability, the MMU-AP series is built with high-grade components that withstand harsh operating conditions. With features such as over-voltage protection, short-circuit protection, and thermal shutdown capabilities, users can trust that their equipment would operate safely and efficiently, thereby extending the lifespan of both the power modules and the devices they serve.

Finally, Toshiba’s commitment to innovation ensures that the MMU-AP series incorporates cutting-edge technology. The series supports communication protocols that enable seamless integration with smart systems, paving the way for advanced monitoring and control functions. This levels up the user experience, providing insights into performance and diagnostics that are crucial for uptime and reliability in demanding environments.

In conclusion, the Toshiba MMU-AP series offers a blend of efficiency, adaptability, and advanced technology, making it a valuable asset for various industrial and commercial applications. Its intelligent design and robust features ensure that users can optimize energy use while maintaining high performance and reliability.

Toshiba MMU-AP0121MH Case of installation to high ceiling, Change of lighting time of filter sign

Models: MMU-AP0181MH MMU-AP0071MH MMU-AP0091MH MMU-AP0151MH MMU-AP0121MH

7 APPLICABLE CONTROLS

In case of installation to high ceiling

Installable ceiling height list

In case of remote controller-less (Group control)

on the indoor P.C. board.

Change of lighting time of filter sign

(1 → 2 → 3 → 4 → 5 → 6 ).

Increased heating effect

Group control

MMU-AP0181MH, MMU-AP0071MH, MMU-AP0091MH, MMU-AP0151MH, MMU-AP0121MH specifications