Enterasys Networks Network Card manual Click the ISP Properties tab, 110

Adding Corporate ISPs	Chapter 5
	Controlling Remote User Dialing & Access

13Click the ISP Properties tab.

The ISP Properties display will appear as show in Figure 61.

Click here to browse the network for the folder where the script is stored

View messages here

Type the login script full path or just the name here

Figure 61 ISP Properties

14In the IP Address field, enter the IP Address of the dial-up server.

If the ISP did not supply this address, you can leave this field blank.

15In the Primary DNS and Secondary DNS fields, enter the IP addresses of DNS servers used for name resolution.

ISPs normally supply both primary and secondary DNS addresses. For corporate dial-up connections into your network, you must specify at least the primary DNS server’s address.

16In the Primary WINS and Secondary WINS fields, enter the IP addresses of WINS servers on your network.

ISPs do not typically use WINS for name resolution. If you employ WINS on your network, enter at least one WINS server address (in the Primary WINS field).

17In the Default Gateway field, enter the IP address of the gateway used to forward packets to other subnets or networks.

110 RiverMaster Administrator’s Guide