Enterasys Networks Network Card manual Viewing Group Policies, 146

Controlling Client Synchronization	Chapter 6
	Managing Users & Groups

Viewing Group Policies

To view a summary of each group’s policy settings, follow these steps:

1 Open the Configuration pullout.

2 Click the Update tab.

3In the Global Area, expand the tree list under Group Areas (click the

+ symbol).

4 Expand the tree list under the name of the group you want to view.

A D next to the group name symbolizes Data Synchronization, an S stands for Software Synchronization. Green indicates synchronization is turned on, red indicates it is turned off. See Figure 77 for examples.

The current policy settings are displayed in the window pane to the right. If data or software synchronization is enabled for that group, the settings displayed are automatically overwritten on the Aurorean Client computer whenever members of that group tunnel into the corporate network. To change these policy settings, refer to the instructions in “Modifying User & Group Information” on page 137.

5To refresh the policy display, click the Refresh button located in the toolbar at the top edge of the pullout.

6To enable client synchronization for a group at any time, right-click on the group name, select Data or Software Synchronization, and click Enable Data or Software Sync as shown in Figure 78.

You can also enable the service on the Manage Users and Groups pullout as described in “Creating a New Group” on page 127. You can disable the service by right-clicking on the group name, clicking on Data or Software Synchronization, and clicking Disable Data or Software Sync; alternatively, you can uncheck either of the synchronization boxes in the Manage Users and Group pullout.

Figure 78 Data and Software Synchronization Dialog Boxes

146 RiverMaster Administrator’s Guide