Panasonic VDR-M50PP, VDR-M70PP Error Messages, 152, Message Cause & Troubleshooting Reference

Error Messages

A message may appear while you are operating the DVD Video Camera. If a message appears, refer to the following table and take appropriate corrective action.

Messages are arranged in alphabetical order.

Message		Cause & Troubleshooting	Reference
			page
(1) Data error in a part of	It is possible that the system cannot normally complete writing of file
image file. Repair data	when, for example, power is turned off for some reason during
now?	recording or editing (deleting, dividing or combining scenes, or
(2) Found error in image	creating play list). Selecting “YES” will automatically repair the
file. Repair data now?	video file, but even if “NO” is selected, the same message will
(3) Data error in all	appear when the DVD Video Camera is turned on next time. (Do not
image file. Repair all	remove the disc while the DVD Video Camera is recognizing it:
data now?	Ignoring this will deactivate the file repair function.)
	Follow the instructions on screen, taking note of the following
	cautions:
	• Data may not be repaired, depending on the timing when power		
	•	was turned off.
		Data may not be repaired normally if data recorded on another
	•	recorder is mixed in.
		The repaired data may be different from the original recorded
	•	content because of partial deletion of defective portion.
		Since the date/time of repair is added to the repaired data (only
		the corrected portion for partial repair), the original date/time
	•	information will be lost.
		Since all movies, and then all stills, are repaired, the order of
		recorded contents will be lost.
	•	(In case of message (2) (3) only)
		See *1 on page 157.
(1) Error has occurred.	• Error has occurred. Try to restart the DVD Video Camera using
Please restart.		the following methods:
	(1) Turn power off, remove the battery pack or AC adaptor and
(2) Error has occurred.
	reattach it, and then turn power on again.
Please reinsert a disc.
	(2) Turn power off, and reinsert the disc. Then turn power on again.
(3) Error has occurred.	(3) See *3 on page 157.
Error code No. xxxx.	(4) If you have another disc available, check to see if any problem		9, 42, 45, 46
Please read the manual.	occurs with the disc. If another disc can be used normally, the
	original disc may be defective: Contact the disc manufacturer.
(4) ERROR xxxx
	If the above procedures cannot solve the problem, take note of
(5) DISK xxxx	the error number, and contact your dealer.
	Reference: “Error Code 2881” shows that the disc cannot be
	recognized properly.
(1) This disc must be	DVD-R disc that was not initialized for camera use was inserted.
formatted before it can
be used by this camera.
(2) Do not format this			47
disc if you want to record
from the PC connection
terminal.
(3) Format the disc now?
Battery pack is almost	Replace with a charged battery, or use AC adaptor to power the		42, 45
empty. Replace it.	DVD Video Camera.
Cannot combine scene.	Unless consecutive scenes are selected, they cannot be combined.		106

152