Setting the Starting Address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a start address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start address. For example, a fixture that uses six DMX channels and was addressed to start on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose start addresses so that the channels used do not overlap, and note the start address selected for future reference.

If this is your first time addressing a fixture using the DMX control protocol, we suggest jumping to the “Appendix” section and reading the heading “DMX Primer”. It contains very useful information that will help you understand its use.

General Troubleshooting

SYMPTOM

POSSIBLE CAUSE(S)

POSSIBLE ACTION(S)

 

 

 

Breaker/Fuse

Excessive circuit load

Check total load placed on the electrical circuit.

Short circuit along the power

Check for a short in the electrical wiring (internal and/or

keeps blowing

 

wires

external)

 

 

 

Device does not

power up

No power Loose power cord

Check for power on power outlet Check power cord

 

Wrong DMX addressing

Check Control Panel and unit addressing

 

Damaged DMX cables

Check DMX cables

Fixture is not

Wrong polarity settings on the

Check polarity switch settings on the controller

controller

responding to

 

 

 

DMX

Loose DMX cables

Check cable connections

 

 

Faulty DMX interface

Replace DMX input

 

Faulty Main PCB

Replace Main PCB

 

 

 

 

Non DMX cables

Use only DMX compatible cables

 

Bouncing signals

Install terminator as suggested

Loss of signal

Long cable / Low level signal

Install amplifier right after fixture with strong signal

 

 

 

Too many fixtures

Install an optically coupled DMX splitter after unit #32

 

Interference from AC wires

Keep DMX cables separated from power cables or

 

 

black lights

 

 

 

If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support.

Contact Us

World W ide

General Information

CHAUVET

 

3000 North 29th Court

 

Hollywood, FL 33020

 

voice:

954.929.1115

 

fax:

954.929.5560

 

toll free: 800.762.1084

Technical Support

CHAUVET

 

3000 North 29th Court

 

Hollywood, FL 33020

 

voice:

954.929.1115 (Press 4)

 

fax:

954.929.5560 (Attention: Service)

World Wide Web

www.chauvetlighting.com

5. Appendix

13

1/6/2010 10:35 AM

Page 13
Image 13
Chauvet 86 user manual Setting the Starting Address, General Troubleshooting, Contact Us

86 specifications

The Chauvet 86 is a standout lighting fixture designed for professional applications in various entertainment venues, including theaters, concerts, and events. This dynamic LED wash light combines advanced features with user-friendly operation, making it a vital tool for lighting designers and operators.

One of the main features of the Chauvet 86 is its impressive brightness. Equipped with multiple high-output LED sources, the fixture provides vibrant colors and a wide coverage area. Whether you need to wash an entire stage or create focused effects, the Chauvet 86 delivers consistency and intensity.

In terms of color mixing capabilities, the Chauvet 86 excels with its RGBW (Red, Green, Blue, and White) configuration. This allows users to create an extensive palette of colors, enabling a high degree of customization for any lighting design. The addition of white LEDs expands the spectrum and offers more nuanced color blends, which is especially useful for achieving pastel shades and bright whites.

Another significant technology featured in the Chauvet 86 is its DMX control capability. The fixture can be easily integrated into existing lighting setups, allowing operators to control it using a DMX console. This level of control provides flexibility in programming complex lighting sequences, making it suitable for both dynamic shows and static installations.

The Chauvet 86 also includes advanced features such as built-in automated programs and sound-activated modes. These options simplify operation, enabling users to create exciting light displays without needing extensive programming knowledge. The fixture’s easy-to-use control panel further enhances accessibility, allowing quick adjustments on the fly.

Durability is another hallmark characteristic of the Chauvet 86. Built with robust materials, this fixture is designed to withstand the rigors of touring and regular performances, ensuring it remains operational even in challenging conditions.

Furthermore, energy efficiency is a vital aspect of the Chauvet 86. The LED technology not only reduces power consumption but also minimizes heat output, enhancing reliability and longevity. This efficiency is a considerable benefit for venues looking to reduce their carbon footprint while maintaining high-quality lighting standards.

In summary, the Chauvet 86 is a versatile and powerful wash light featuring excellent brightness, RGBW color mixing, DMX control, and user-friendly operation. Its durability and energy efficiency make it an ideal choice for professionals seeking a reliable lighting solution in various applications.