Panasonic VDR-M70PP, VDR-M50PP operating instructions Self Timer

Note:

•The PHOTO Input setting can be confirmed using the on- screen information.

•The PHOTO Input setting will be stored in memory even when the DVD Video Camera is turned off.

•Refer to “Recording (Dubbing) Images” on page 75 to see how to connect the DVD Video Camera to another device.

•“PHOTO Input” is displayed only when “Input Source” is set to “LINE” or “S LINE” (VDR-M70PP only).

•“OSD Output” is displayed only when “Input Source” is set to “CAMERA”.

13

Self Timer

You can record photos using the self timer function, as with ordinary cameras.

The self timer function is valid only when recording photos (stills).

1 Press the MENU button, choose “Self Timer” on the “Record Functions Setup” menu screen, and then press the Abutton.

2 Select “On”, and then press the Abutton.

The self timer will be set.

Record Func t i ons		Setup
I n p u t Sou r ce
Se l f	T i mer	On
OSD	Ou t p u t	Of f

ENTER RETURN RAM

4 Press the REC button.

The recording indicator at the front of DVD Video Camera will blink.

The Self timer indicator will start to count down, and recording will commence approximately 10 seconds later.

Note:

• You can also check that self timer has been set by

reviewing the on-screen information.

3 Press the MENU button to end the setting.

				REM	9 9 9
		1 0
Self timer recording
	8				: 0 0 AM
			S E P 3 0		2 0 0	4

• To release the self timer mode, choose “Off” on the menu

screen or turn DVD Video Camera off.

• To suspend self timer, press the REC button again before

recording starts, or press the g button.

• “PHOTO Input” is displayed only when “Input Source” is

set to “LINE” or “S LINE” (VDR-M70PP only).

• “OSD Output” is displayed only when “Input Source” is set

to “CAMERA”.

89