Panasonic VDR-M50PP, VDR-M70PP operating instructions 110, Designating Scenes to be Printed Dpof

Press the DISC NAVIGATION button. Select the scene to which DPOF is to be set.

”.

3

Designating Scenes to be Printed (DPOF)

You can use DPOF to set print information, including selection of the scenes to be printed, so that you will be able to use it on a system conforming to DPOF.

Note:

DPOF stands for digital print order format. DPOF is used to ask a print lab to print recorded stills.

1 Set the power switch to “

2

3

4 Press the MENU button.

5 Choose “DPOF” on the “Scene” menu screen, and then press the Abutton.

6 The “DPOF Set” screen will appear: If you are sure you want to set DPOF to the scene, press the Abutton.

Sc ene

De l e t e

L o c k

DPOF

Se l e c t

De t a i l

ENTER RETURN

7 Use joystick to specify the	DPOF Set	7 / 19
number of prints, and then
press the Abutton:
		3

Tilt up or right: To increase	ENTER EX I T
the number by one.
Tilt down or left: To
decrease the number by one.

After setting, the “DPOF Set” screen will be restored. Repeat steps 6 and 7 to set DPOF to another still.

8 Press the g button to quit.

Note:

• If you press the MENU button before pressing the A

button in step 6, the submenu screen will appear (P.102).

• You can also select multiple photos (P.98).

• If you specify the number after selecting multiple stills, the

same specified number will be set to all those stills.

DPOF Set 7 / 19

6

ENTER EXIT DPOF icon

• Up to 99 prints can be set for one scene. The maximum

number of settable prints on one card is 999.

• This DVD Video Camera may not recognize DPOF that

has been set on another device: Always set the DPOF on

this DVD Video Camera.

If you want to change the scene to which DPOF is set, you can change it on this screen.

110