Panasonic VDR-M50PP, VDR-M70PP operating instructions 154

Message		Cause & Troubleshooting	Reference
			page
Control Information	Mismatch may occur between the recorded image and scene
Error.	information.		126
	Update the control information.
	•	Use another disc.	28, 74
	•	See *3 on page 157.
COPY PROTECTED	The video signal input to this DVD Video Camera may be copy-
	guarded.
	Some prerecorded video materials, such as movies, are guarded		75
	against copying.
	Copy-guarded materials cannot be recorded on this DVD Video
	Camera.
DISC ACCESS	The recorded scene is being stored on disc.
	Wait until the message disappears, and you can start to use the		51, 52
	DVD Video Camera.
	This DVD Video Camera is verifying whether the correct disc has
	been inserted.
	Wait until the message disappears, and you can start to use the		
	DVD Video Camera.
	This message will be displayed for a little longer when the date
	changes.
DISC ALMOST FULL	The disc will soon be full, and recording will be impossible.
	Delete unnecessary scenes and try the disc again, or use another		32, 33,101
	disc.
Disc error has occurred.	•	Disc error occurred during finalizing, and finalizing failed.
Finalizing is not	•	Replace the disc.	127
complete.		See *3 on 157
Disc error has occurred.	• Has the disc been initialized on PC? Has initializing the disc on
Format the disc now?		PC been interrupted?
		Choose “YES” and initialize the disc when using it on this DVD	125
	•	Video Camera. Initializing the disc will erase all data on it.
		See *2 on page 157.
Disc error has occurred.	The disc may be dirty.
Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before reusing
complete.	it, or use another disc.		74, 125
	This message may also appear if you insert a disc for which
	formatting was interrupted midway. In this case, use another disc.
Disc error has occurred.	Disc error could have occurred during editing of scenes.
Keep disc inside &	Turn off the DVD Video Camera with the disc being used in it,		45
restart.	connect AC adaptor, and then power the DVD Video Camera again.
	Repair of scenes will be tried.
Disc error.	•	Use another disc.	28, 74
	•	See *3 on page 157.
	•	Mismatch in recording information may be caused by editing
		done on some device other than this DVD Video Camera.	125
		Initialize the disc or use another disc.
	•
		Initializing the disc will erase all data on it.
“DISCERROR”appears	If you have write-protected a disc using the write-protect setting tool
when an attempt to	(WPTOOL) that is equipped with the DVD-RAM driver contained on		
release write-protect is	the CD-ROM provided with this DVD Video Camera, you cannot
made.	release the write-protect on this DVD Video Camera as is. Use the
	write-protect setting tool on PC to release the write-protect.

154