Panasonic VDR-M70PP Skip Playback of Movie, Playing Back Stills, When using disc, When using card

Skip Playback of Movie

During playback, tilt the joystick up or down to locate the start of desired scene.

Tilt down once	: To skip to the first image of the
	scene following the one being
	played back, and start playback.
Tilt up once	: To return to the first image of the
	scene being played back, and start
	playback.
Hold down	: To continuously locate the
	beginnings of scenes, starting
	from the scene following the scene
	being played back. When the
	desired image appears, release the
	joystick: Playback will start from
	that point.
Hold up	: To continuously locate the
	beginnings of scenes backward,
	starting from the scene preceding
	the scene currently being played
	back. When the desired image
	appears, release the joystick:
	Playback will start from that point.

Playing Back Stills

Tilt the joystick up or down during playback to quickly play back stills in sequence.

Tilt down once	:	To display stills one by one
		forward
Tilt up once	:	To display stills one by one
		backward

				12
Portion being played back
Tilt up twice	Tilt up once		Tilt down once	Tilt down twice
Scene 1		Scene 2		Scene 3
Portion being played back
Tilt up once		Tilt down once Tilt down twice
Scene 1		Scene 2		Scene 3

Tilting up the joystick at a portion several seconds from the start of scene being played back will return to the start of the scene preceding that being played back.

Note:

•If you perform skip playback during playback pause, the DVD Video Camera will enter playback pause mode at the beginning of the located scene.

•Tilting down in the last scene on disc will set the DVD Video Camera to playback pause mode at the last image.

•See “Check 3” on page 150 if skip playback does not operate normally.

13

[When using disc]

Releasing the joystick will start continuous playback.

[When using card]

When the joystick is released, the photo at that point will be displayed, and then the DVD Video Camera will enter playback pause mode.

Set the slide show function for continuous display (P. 129).

61