Regency I2400M Installation, Installing Your Insert, Optional Flue Connector Kit

INSTALLATION

INSTALLING YOUR

INSERT

Your insert is very heavy and will require two or three people to move it into position. The insert can be made a little lighter by removing the cast iron door by opening it and lifting it off its hinges. Be sure to protect your hearth extension with a heavy blanket or carpet scrap during the installation.

Convection Grills

The convection grills are installed before the unit is positioned inside the fireplace.

Position the grill on the inside bodyface side and fasten using the bolts, washers and nuts provided (2 per side) as shown in the diagrams.

View from Rear of Insert

Note: The grill has a front and rear, the holes on the front side have rounded edges and the rear holes have flat edges.

OPTIONAL FLUE

CONNECTOR KIT

The Straight Flue Adaptor (Part #846-504) shown here, may be used to produce a secure connection between your flue connector and the insert collar. Detailed installation instructions are included with the kit.

Regency I2400M 7