Panasonic VDR-M50PP, VDR-M70PP 108, Copying Stills on DVD-RAM Disc to Card Copy

1

Copying Stills on DVD-RAM Disc to Card (Copy)

1 Set the power switch to “	” or “	“.
2 Press the DISC NAVIGATION button.
3 Select the still to be copied.
4 Press the MENU button.
5 Choose “Copy” on the	Sc ene
“Scene” menu screen, and
	De l e t e
then press the Abutton.	Ed i t
	Copy
	Se l e c t
	De t a i l
	ETC
	ENTER	RETURN	RAM
6 The “Copy to card” screen	Copy t o	card	003 / 014
will appear: If you are sure
you want to copy the
selected still, press the A
button.	ENTER	EX IT	RAM

If you want to change the

still to be copied, you can change it on this screen.

Note:

•No movie can be copied.

•When you can copy stills recorded on DVD-RAM disc to card, recording quality will automatically be set to “FINE”.

•If you press the MENU button before pressing the A button in step 6, the submenu screen will appear (P.102).

•See “Category” (P.128) to check the stills recorded on DVD-RAM disc.

•You can also select multiple scenes (P.98).

•Even if all scenes, including movies, are selected to be copied, only stills will be copied.

•Data on card cannot be copied to disc.

•Stills recorded on a device other than this DVD Video Camera may not be copied normally.

7 The screen for verifying
	Copy	t o c a r d
copy will appear: Choose
			t o c a r d ?
“YES”, and then press the
			Copy	PHOTO scenes
Abutton.
			YES		NO
Choose “NO” to cancel	ENTER
copy.
After Yes or No setting, the “Copy to card” screen will

be restored.

Repeat steps 6 and 7 to copy other stills to card.

8 Press the g button to quit.

108