TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
String will not advance when using the
1.String is welded to itself.
2.Not enough string on spool.
3.String is worn too short.
4.String is tangled on spool.
1.Lubricate with silicone spray.
2.Install more string. Refer to String Replacement earlier in this manual.
3.Pull string while pressing button.
4.Remove string from spool and rewind. Refer to String Replacement earlier in this manual.
Grass wraps around driveshaft | Cutting tall grass at ground |
housing and string head | level. |
Cut tall grass from the top down to prevent wrapping.
Motor fails to start when switch | Battery is not secure. | To secure the battery pack, make sure the |
trigger is depressed. |
| latches on each side of the battery pack |
|
| snap into place. |
| Battery is not charged. | Charge the battery pack according to the |
|
| instructions included with your model. |
|
|
|
| L |
|
|
| CAL |
| |
|
| ||
| .com | ||
800 |
| ||
1- | .ryobitools | ||
www |
|
|
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi® Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
15 — English