Enterasys Networks Network Card manual Virtual Subnetting, IP Subnetting

Virtual Subnetting	Chapter 3
	Configuring an ANG-3000/7000

13Do one of the following:

–If you are setting up your Aurorean Virtual Network for the first time, continue with the next subsection to configure additional ANG network settings.

–If you are finished with the ANG network configuration and you want to put the new network settings into effect, no additional work is required.

Virtual Subnetting

Virtual subnets fall into two categories:

HIP subnets that serve as IP address pools for allocation to remote clients when they connect.

HAn IPX network number that is shared by all remote clients when they connect and use IPX protocol to access Novell NetWare servers.

IP Subnetting

To set up virtual subnets of IP addresses to allocate to remote users, perform the following steps:

1 Open the Configuration pullout.

2In the list of Aurorean devices, expand the tree list under Servers (click the + symbol).

3 Expand the tree list under the name of your ANG.

4Click on Subnetting to display IP and IPX subnet tab pages.

5Click the IP Subnets tab if it is not already displayed.

A sample IP subnet window is shown in Figure 27.

50 RiverMaster Administrator’s Guide