Enterasys Networks Network Card manual Modifying User & Group Information, 137

Chapter 6 Creating a New Group

Managing Users & Groups

Modifying User & Group Information

After a user or group has been created, you can modify any setting associated with the user or group name, including group policies, IP address allocation methods, and user passwords. Although you cannot rename a user or group, you can accomplish the same goal by removing the user or group and then reentering the information using a new name.

To modify user or group information, perform the following steps:

1Open the Manage Users and Groups pullout.

2Click on the appropriate icon in the lower left corner of the pullout to select the Group or User view.

3Select the user or group name from the list of Current Users or Current Groups.

4Click Modify.

5Change the settings for the user or group as required.

6Do one of the following:

–Click Update to put your changes into effect.

–Click Cancel to return the user or group information to its original state.

The modified information is immediately saved on the APS.

NOTE

Any changes made to Group Policies are conveyed to users automatically through Client Synchronization regardless of whether Data or Software Synchronization are enabled or not.

RiverMaster Administrator’s Guide 137