Enterasys Networks Network Card manual Policy Explanation, 130

Creating a New Group	Chapter 6
	Managing Users & Groups

	Table 5 Dial Policies
Policy	Explanation
Allow ISP Selection	When enabled, Aurorean users can decide whether or not
	to disable an ISP so that it is not used for dialing. When an
	ISP is disabled, its associated POP phone numbers do not
	appear in the dial list. This policy is enabled by default.
Allow POP Ordering	When enabled, Aurorean users can change the dialing
	sequence for POPs to match their personal preferences.
	ThispolicyprovidestheflexibilityofmixingPOPsofdifferent
	ISPs as well as moving 800 number POPs ahead of local
	POP phone numbers. This policy is disabled by default.
Allow Dial String Editing	When enabled, Aurorean users can edit the digit string
	dialed by their modem, to include any special prefix
	numbers or other digits required by the telephone
	equipment at that site. This policy is disabled by default.
Allow Manual Dialing	When enabled, Aurorean users can choose to manually dial
	a POP phone number using a telephone. With manual
	dialing, the user’smodemdoesnotsendanydigits; the user
	must lift the receiver of a telephone and dial the POP
	number using the telephone’s keypad. This policy is
	disabled by default.
Allow 800 Number Dialing	When enabled, Aurorean users can dial a nationwide POP
	phone number (800, 888, or 877 number) instead of a local
	phone number. Because ISPs often charge a premium for
	this type of access, your may want to restrict users from
	dialing these numbers. This policy is disabled by default.

9Click the Password tab and set the group’s password policies as described in Table 6 and shown in Figure 69.

130 RiverMaster Administrator’s Guide