30
Lights/Code Cause Action
O bNo paper is loaded in the sheet feeder. Load paper in the sheet feeder. R & 14 Then press
x Start E [Color] to continue or y Stop to cancel.
Multiple pages have been fed into the sheet feeder.
k bPaper is jammed. Clear the jammed paper. R & 39
k BAn ink cartridge is running low on ink. You can check the ink status from your computer. Obtain a
replacement ink cartridge.
O BAn ink cartridge is expended or not installed
correctly.
If any cartridge is expended, you cannot print until you
replace it. Replace the ink cartridge. R & 34
k b
k Copies
An unsupported memory card is inserted. Remove the memory card. R & 18
The memory card does not contain any valid images.
k b
k Copies
The index sheet was not recognized because it is not
positioned correctly.
Position the index sheet correctly on the document table,
aligning the top of it with the right edge of the glass. Then
press x Start E [Color] to continue or y Stop to cancel.
The index sheet was not printed correctly. Print the index
sheet, mark it, and try again. R & 20
k b
k Copies
The index sheet is not marked correctly. Remove the index sheet, mark it correctly, and try again.
R & 20
k b
k Copies
The index sheet does not match the photos on the
memory card.
Remove the memory card and insert the card used to
print the index sheet—or place the correct index sheet on
the document table. Then press x Start E [Color] to
continue or y Stop to cancel.
k b
k Copies
An unsupported device (HUB) is connected. Remove the HUB.
k b
k Copies
An unsupported device is connected. Remove the connected device or press the y Stop.
k P, O b, O B
k Copies
The waste ink pad in the printer is saturated. Contact your dealer to replace it.
k All lights
k Copies
There is a problem with the printer. Turn the printer o and then back on. If the error does not
clear, contact your dealer.
Error Indicators