Enterasys Networks Network Card manual Enterasys Authentication, Shows the Configuration pullout

Chapter 4 Adding an Authorization Plug-In

Setting Up Aurorean Services

NOTE

Do not remove the Enterasys Authentication plug-in or convert it into a RADIUS or SecurID plug-in. Without a plug-in of this type, you will not be able to log into RiverMaster.

Enterasys Authentication

To modify the Enterasys Authentication plug-in, perform the following steps:

1 Open the Configuration pullout.

2In the list of Aurorean devices, expand the tree list (by clicking the + symbol) under the name of your APS, and expand it again under Auth Service.

Figure 44 shows the Configuration pullout.

Click here to view Configure pull-down box options

	Click here to
Click here to add	open the
	Configuration
a new Authorization
	pullout
Plug-in or
here to expand the
tree list and select
or create a plug-in

Click here to access the APS configuration windows

Click here to configure the plug-in

Figure 44 Configure Authorization Plug-ins Window

RiverMaster Administrator’s Guide 81