OK International Comprehensive User Guide for TS255 Water Dispenser

Techcon Systems

TS250 / 255

Precision Dispensers

User Guide

English, German, French, Italian and Spanish version

TS250 / 255	TS250 / 255	TS250 / 255	TS250 / 255
Präzsions-Dosiergeräte	Doseurs de	Dosatore di	Dosificadores de
	précision	precisione	precisión
Benutzerhandbuch	Guide de	Manuale dell’utente	Guía del usuario
	l'utilisateur

Copyright © OK International

		CONTENTS
		Page Number
1.	Safety	……………………………………………………………2
2.	Symbol Definitions …………………………………………………3

3.Specifications ……………………………………………….…………...3

4.	Features ……………………………………………………………4
5.	Connecting the Unit	……………………….…….………..…………5
6.	Setup Instructions	…………………………………………………5
7.	Troubleshooting	…………………………………………………6

8.Maintenance ……………………………………………………………7

9.	Spare Parts and Accessories ………………………………………7
10.	Warranty ……………………………………………………………7
11.	I/O Configuration and End of Cycle Switch ……………………….…...7
1	SAFETY
	1.1 Intended Use:

WARNING: Use of this equipment in ways other than those described in this User Guide may result in injury to persons or damage to property. Use this equipment only as described in this User Guide.

OK International cannot be responsible for injuries or damages resulting from unintended applications of its equipment. Unintended uses may result form taking the following actions:

•Making changes to equipment that has not been recommended in the User Guide

•Using incompatible or damaged replacement partsUsing unapproved accessories or auxiliary equipment

1.2Safety Precautions:

•Do not operate this unit in excess of maximum ratings/settings

•Always wear appropriate personal protective clothing or apparel

•Use only the following power adaptor models: PSA15R-240P(ZJ) or PW118RA2403B01, PW118RA2403H01, PW118RA2403M01, PW118RA2403G01

•Care must be taken to prevent the ingress of corrosive or flammable fluid back into the unit. If corrosive or flammable fluids are used, an inline filter (881- 000-000), not included, must be installed on the dispenser to help prevent the fluids from being sucked back into the unit

•The fluid being dispensed may be toxic and/or hazardous. Refer to Material Safety Data Sheet for proper handling and safety precautions

•If a piston is not used with the barrel, an inline filter (881-000-000), not included, and must be installed on the receiver head to help prevent fluids from

2