TIME CODE | – Recording the time code – |
Time codes can be recorded with the following ways.
¥Record it from preset data.
¥Record it following the one last recorded on the tape.
¥Record the time code, which is input to the DV IN/OUT terminal.
¥Record the time code from an external time code generator.
Recording from preset data
Record preset time code data to the internal time code generator in the TIME CODE Preset screen.
TC/UB/CLOCK(1/2) Menu screen
Ð Ð Ð T C / U B / C L O C K ( 1 / 2 )Ð Ð Ð
T C G S O U R C E | I N T E R N A L | |
T C G S E L E C T | P R E S E T | |
T C G M O D E | R E C - R U N | |
N D F / D F ( N T S C ) | Ð Ð Ð | |
D F B I T ( P A L ) | O N | |
T C D U P L I C A T E | O F F | |
T C O F F S E T | O F F | |
N E X T | P A G E |
|
P A G E | B A C K |
|
REC button |
| ||
|
| OPERATE |
|
A.DUB | REC | PLAY | PAUSE |
PROFESSIONAL |
|
|
|
EJECT | REW | STOP | FF |
|
|
| AUDIO | INPUT |
|
| COUNTER MONITOR OUTPUT SELECT | REMOTE | |||
| CTL | L | DV |
| |
| TC | MIX | MIX | LINE |
|
UB | R | Y/C | LOCAL | ||
|
|
| (CPN) | ||
:Setting:
●Set the TC/UB/CLOCK(1/2) Menu as follows.
TCG SOURCE : INTERNAL
TCG SELECT : PRESET
TCG MODE : REC RUN or FREE RUN
NDF/DF (NTSC) : NON DROP or DROP frame mode.
:Operation:
1. Check the preset time code.
1Set the COUNTER switch to TC or UB.
2In the STOP mode, hold down the REC button.
¥The preset time code or the userÕs bit is displayed on the monitor or the LCD. The counter mode is displayed as TCG or UBG.
3When the REC button is released, it returns to the original display.
2.Record.
Press the PLAY button while holding down the REC button. ¥ The time code and userÕs bit are recorded.
To stop recording, press the STOP button.
COUNTER switch
Preset time code
●Stopping the power supply to the DV IN terminal of
●With FREE RUN, if the mode is changed from OPERATE ON to OPERATE OFF and back to OPERATE ON before
60
