Playback of tapes recorded in the PAL format | JVC BR-DV6000U

PLAYBACK

– Basic playback procedure –

PLAY button

								OPERATE
Mini	MENU	DISP	RESET	PROFESSIONAL	A.DUB		REC	PLAY		PAUSE
				PROFESSIONAL
	SEARCH–	SET	SEARCH+
					EJECT		REW	STOP		FF
MIC	HOLD	BLANK	CUE UP
	HOLD	BLANK	CUE UP
	PHONES	REC LEVEL					AUDIO		INPUT	REMOTE
					COUNTER MONITOR OUTPUT				SELECT	REMOTE
					CTL	L	CH-1/2		DV
					TC	MIX	MIX	LINE
		CH-1/3	CH-2/4	BR-DV6000	UB	R	CH-3/4		Y/C	LOCAL
								(CPN)		LOCAL

PAUSE button

FF button

Note

Tapes recorded in the LP mode cannot be played. The monitor displays an alarm message: “LP TAPE!”

Memo

●Images cannot be pro- duced properly if the signal format selected for PB/DV IN in the SYSTEM (2/2) Menu screen is different from the one of the tape to be played.

●When output of still image continues for a prolonged period, BR-DV6000 enters the tape protection mode.

The time can be selected from LONG PAUSE TIME in the SYSTEM Menu screen.

●Only PAL/NTSC DVCAM tapes are detected auto- matically in the PLAYBACK mode.

REW button STOP button

1. Load a recorded cassette tape.

¥The power for BR-DV6000 is turned on.

2.Start playback.

Press the PLAY button.

¥Playback starts. If the tape is recorded in the DVCAM format, the status display of the recording/playback speed mode (SP/ LP) disappears from the monitor or LCD.

3.Pause the tape.

Press the PAUSE button.

¥A still image is output.

Memo

The still image selected with STL/F.ADV MODE in the SYSTEM (1/2) Menu screen is output. (1st field image/ 2nd field image/ Frame image)

4. Resume playback.

Press the PLAY button.

5. Stop playback.

Press the STOP button.

Playback of tapes recorded in the PAL format

BR-DV6000 does NOT auto- matically select NTSC/PAL playback. NTSC or PAL play- back mode selection is per- formed in the menu.

•Set PB/DV IN in the SYSTEM (2/2) Menu screen to PAL for playing a tape recorded in PAL.

•Signal systems cannot be converted.

Fast forward/rewind

When BR-DV6000 is in the STOP mode, press the FF button to fast-forward the tape.

When BR-DV6000 is in the STOP mode, press the REW button to rewind the tape.

49

Image 49

JVC BR-DV6000U Playback of tapes recorded in the PAL format, Fast forward/rewind, Basic playback procedure

Contents

LLT0033-001C-H DV Video Cassette Recorder S3125A Reorient or relocate the receiving antenna Remarque DV format Backup recording functionCompatible mechanisms for standard/mini DV cas- sette tapes Sync in terminal Table of Contents Remarks of usage Introduction Place of storage and use Handling the unit Regular maintenance Regular maintenance Head cleaning Maintenance consultation Cassette tape Cleaning tapeMemo Remarks on the use of tape Over 10 years CondensationIt is used at a place of high humidity Head drum Videotape Front panel Names and Functions of PartsCassette loading slot/LED Operate button/LED Pause button/LED Play button/LED FF button/LED Stop button Audio Output switch Memo 4REMOTE/LOCAL switch Input Select switchSwitching is invalid during recording Counter switch Audio Monitor switch The following information is also dis- played @PHONES Headphone volume Reset buttonCH2/4 Menu button Special functions/Setting buttons Video Line in terminal BNC Rear panelVideo Y/C in terminal 4-PIN Video Line OUT terminal BNC Time Code in terminal BNC Sync in synchronization input Terminal BNCTime Code OUT terminal BNC CH1/3 Audio in terminal RCA Switch DC power input terminal 2-PIN Timer recording/playbackSignal GND terminal DC power cord clamp Mini jack ‹ Remote 1 RS-422A terminal ¤ Serial Remote OUT terminal mini jack› Remote 2 JVC Bus terminal 12-PIN Slot cover for an optional board On-screen display ON-SCREEN DisplayOn-screen display Description Operation Memo Status displaySampling frequency/audio Output CH 00 00 00 Counter display Status/Event display Insert editing in the 32 k audio modeDisplay Description Display displayed during operation Alarm display REC TAB DUB InhibitBlank DUB Inhibit Dvcam Edit Inhibit LCD display LCD display mode enlarged displayLCD Displays the operation mode of the VCR Displays the framing mode of the time codeIt is displayed when condensation occurs Non-drop frame Output signal Connecting video signals Input signal Connection Yes Synchronization signalPlayback Record Audio Output switches and output channels Connecting audio signalsHeadphone terminal Digital output Connecting to a monitor TVMicrophone input terminal Digital input Related VCRs Connecting to editing sytem Remote extension cable DV cable When an RS-422A-compatible remote controller is used Dubbing with 1 VCR Connection Connection with serial remote terminals DC in terminal Timer switch Connecting the AC adapterAlarm message Connect the supplied AC adaptor to BR-DV6000 Turning off the power Turning on the powerTurning on/off the power Preparation Operation Lock mode Selecting the operating method main unit/remote controllerRemote controller and operation lock mode Operation method main unit Ejecting the cassette tape Loading the cassette tapeLoading/Ejecting cassette Adjusting the LCD display Setting the LCD displaySetting the display time of the LCD display Selecting the LCD status display Setting/Displaying date and time Setting date and timeSetting the date and time in the Clock Adjust Menu screen On-screen status display Selecting date/time display Display 2/2 Menu screen Recording Setting Recording procedure Recording index signals Press the Play button to play the tape Audio dubbingPress the Pause button while holding down the A.DUB button Press the Play button For using GY-DV5000 as the source unit RECORDING- Backup recording functionMinute tape 115MIN Minute tape 175MIN 265MIN Recording Recording with serial remote terminals Serial remote controller RM-G30, sold separately can be conBR-DV6000 Output from the Serial Remote OUT terminal. Only with Oper Adjust the recording level of sound External timer recordingSet the time, etc., of the external timer LCD display Playback Setting the switches on the front panel System Menu screen Video Menu Playback of tapes recorded in the PAL format Basic playback procedureFast forward/rewind Frame-advance playback Search modeSpecial playback functions Search speed Decreasing the playback speed by 10% Increasing the playback speed by 7%REW button Blank search Index searchSearch function In the Stop mode, press the Blank button Repeat playback Repeat Mode in the System 1/2 Menu screenRepeat operation Index repeat playback Registering cue-up points For details on time code setting and recordingClearing registered cue-up points Multi cue-up Exiting the Multi Cue-up screen Changing cue-up pointsSearching cue-up points Mode, the timer symbol lights up in green External timer playbackSet up the time, etc., of the external timer Connect the supplied AC adapter Dubbing machine BR-DV6000 Displaying the time code Time Code Presetting the time code Preset time code Recording from preset dataTCG Source Internal TCG Select Preset Recording the time code Recording time code, input to the DV IN/OUT terminal TCG ModeTCG Source TCG Select Record time codes from an external time code generator Front switches TC/UB/CLOCK1/2 Menu screen Set TCG Source to Òexternaló Press the Play button to go to the Playback mode Set the Counter switch to Òtcó or ÒubóPlaying back the time code Monitor / LCD Status display Edit mode Analog editing Mode select Edit Editing with an RS-422A/JVC bus edit remote controllerKHz mode Yes*2 Edit mode DV editing Mode select Following editing mode is not availableAUD-1 AUD-2 AUD-1 Remote 1/2 Menu screen Editing procedure with BR-DV6000 Remote 2/2 Menu screen To edit with DV connection Setting of RM-G820 Setting the Time Code mode used as editing recorderMaking prerecorded base tape used as editing recorder Confirmation by preview editing Remote FF/REW Mode Using a non-linear editing systemEdit Controller Type in the Remote 2/2 Menu screen Structure of the Menu screens Menu Screens Set BR-DV6000 to the Stop or Still mode Setting the menusDisplaying the Menu screen items for setting TOP Menu screen System 2/2 Menu screen System Menu screens TOP Menu screenDescription of the Menu screens System 1/2 menu 25MIN Backup REC55MIN 75MIN System 2/2 Menu Menu Screens Description of the Menu screens Remote 1/2 Menu screen Remote Menu screens Remote 2/2 Menu screen PB Start DelaySynchroni Zation Audio Menu screen Video Menu screen TC/UB/CLOCK 1/2 Menu screen TC/UB/CLOCK Menu screens TC/UB/CLOCK 2/2 Menu screen AdjustBIT PAL Date REC Display 1/2 Menu screen Display Menu screens Display 2/2 Menu screen RS-232C Interface Command tables Ascii code table RS-232C specifications 9PIN D-Sub Pin No RxD Preparation RS-232C commands Command Description Error commands Return commands from the VCR Example of Clear Error RS-232C Interface RS-232C commands First byte Bit No Status If the bit is Setup preset commands Second byte Third byte ED Memory SW Preset B/J1 Menu switch setup commandExample Check the Sync Select setting Example Set Sync Select to External D1/D2 System MenusMenu Set value Corresponding bit values D1/D2 Menu Set value Remote Menus Video Menus Audio Menus TC/UB/CLOCK Menus MAX5 Display Menus12H 24H Others Alarm display Displayed regardless of the Display mode Warning display Displayed regardless of the Display mode Troubleshooting Checking the hour meter Set BR-DV6000 to the Stop mode¥ The System 1/2 Menu screen is displayed Press the Menu button to return to the normal screen Optional devices Installing SA-X61U or SA-X62U RS-232C interface board SA-K46U XLR in board SA-X61U XLR OUT board SA-X62U Install the SA-K46U Installing SA-K46U RS-232C interface boardHexagonal screws Remove the RS-422A Remote 1 terminal Specifications 212 External dimensions Unit mm AC adapter section Supplement Victor Company of JAPAN, Limited