JVC BR-DV6000U instruction manual Troubleshooting

OTHERS		– Troubleshooting –
	Symptom	Action
	No power.	Is the AC adapter correctly connected?
	Unable to record.	Is the slide of the cassette tape turned to ÒRECÓ?
		Set it to ÒRECÓ if it is at the ÒSAVEÓ position.
	The operation buttons of BR-	Is OPERATION LOCK of the SYSTEM (2/2) menu set to ON?
	DV6000 do not work.	Set it to OFF if the operation buttons are to be used.
		For REMOTE, select the buttons that can be operated with the
		LOCAL FUNCTION Menu.
	Editing cannot be controlled	To control with RS-422A, set REMOTE SEL 9-PIN in the RE-
	even after the REMOTE/LOCAL	MOTE (1/2) Menu screen to ÒONÓ.
	switch is set to REMOTE.	To control with the JVC bus, set REMOTE SEL JVC to ÒONÓ.
	Noise is produced on the	¥ The tape is damaged.
	playback video.	Replace the tape.
	Playback sound interrupted.	¥ The head is dirty.
		Clean it with the specified head-cleaning tape. (Page 8)
	Time codes are not correctly	Is TC DUPLICATE in the TC/UB/CLOCK (1/2) Menu screen
	recorded during DV signal input.	correctly set up?
	Unable to turn on the power with	IsnÕt the REMOTE/LOCAL switch set to REMOTE when LO-
	the OPERATE button.	CAL FUNCTION in the REMOTE Menu screen is not set to
		ALL KEYS?
	Serial remote control does not	IsnÕt REMOTE SEL SER in the REMOTE (1/2) Menu screen
	function.	set to OFF?
		For serial remote control, set it to ON or LOC+REM.
	Unable to operate BR-DV6000	IsnÕt REMOTE SEL DV in the REMOTE (1/2) Menu screen set
	with the DV terminal.	to OFF?
		To operate with the DV terminal, set it to ON or LOC+REM.
	When the power is turned on,	The TIMER switch on the rear panel is set to REC or PLAY.
	the unit goes into the REC or	Check the setting of the TIMER switch before turning on the
	PLAYBACK mode.	power.

99