JVC BR-DV6000U Installing SA-K46U RS-232C interface board, Hexagonal screws, Install the SA-K46U

OTHERS – Installing SA-K46U RS-232C interface board –

The RS-422A REMOTE 1 terminal of BR-DV6000 can be replaced with SA-K46U RS-232C inter- face board. Use the plate for the RS-422A REMOTE 1 terminal for installing SA-K46U RS-232C interface board.

The replacement procedure is described below. However, to prevent electrical shock or injury, the work should be performed only by a qualified personnel or a JVC authorized service agent.

A

AUDIO

CH 1/3 CH 2/4

IN

OUT

PLAY

MONITOR
OUT	REMOTE 1

Caution

To prevent electrical shock, remove the AC adaptor before install- ing SA-K46U.

A

REMO

RS-422A REMOTE

Plate

Hexagon screw

Socket wrench

SA-K46U

Plate

Plate

Hexagon screw Screw hole

Wire (Red)

REMO

1. Remove the RS-422A REMOTE 1 terminal.

1Remove the two screws Å and pull out the RS-422A REMOTE 1 terminal.

2Remove the connector cable connected to the connector of the RS-422A REMOTE board.

❈Remove the cable carefully not to damage it.

2. Remove the plate of RS-422A REMOTE 1 terminal.

¥For removing the plate, remove the two hexagonal screws first with a tool such as a socket wrench.

3.Remove the SA-K46U plate in the same procedure above.

4.Fix the plate of RS-422A REMOTE 1 terminal, removed in 2 above, to SA-K46U.

Hexagonal screws

The screw holes for the hexagonal screws are of the inch system.

5. Install the SA-K46U.

1Connect the connector cable with red wires to the connector of

the SA-K46U board.

Memo

BR-DV6000 connector cable colors

RS-232C: Red RS-422A: Yellow

2Fix SA-K46U to BR-DV6000 with the two screws Å, removed

in 1 - 1.

102