NAMES AND FUNCTIONS OF PARTS
– Rear panel – (continued)
VIDEO | COMPONENT |
| REMOTE2 | ||
LINE |
|
|
|
|
|
Y/C |
|
|
|
|
|
IN | IN |
|
| ||
|
|
| |||
| Y |
|
|
|
|
|
|
| OUT | AUDIO | |
|
|
|
| CH 1/3 | CH 2/4 |
›
fi
OUT
|
|
|
|
| IN |
|
|
|
|
|
| OUT |
|
MONITOR | IN | OUT |
|
|
| |
| OUT |
|
|
| ||
| SYNC IN | TIME CODE |
|
|
| |
& |
| IN | OUT | OFF |
|
|
|
|
|
|
| ||
|
|
| REC |
| PLAY |
|
SIGNAL |
| DV | SERIAL | TIMER | MONITOR |
|
DC12V | IN/OUT | OUT | REMOTE1 | |||
GND |
| REMOTE |
|
| ||
| * ^ | ( ⁄ ¤ ) |
| ‹ | ||
^DC power input terminal |
| )[TIMER] recording/playback | ||||
This terminal is for inputting DC 12 V. Connect | switch | |||||
the DC power cord of the supplied AC adapter. | This switch is for setting | |||||
Memo |
|
|
|
| timer recording or timer playback when power | |
● When power is supplied to this terminal, the | is supplied to the ^ DC power input terminal | |||||
OPERATE indicator located on the front panel | according to an external timer. | |||||
lights up. (The indicator turns red when BR- | OFF : No timer recording or timer playback. | |||||
DV6000 is in the OPERATE OFF state) |
| REC : When power is supplied, | ||||
● Whether to set |
| starts recording automatically. | ||||
ERATE ON mode or OPERATE OFF mode |
| (Timer recording) | ||||
when power is supplied to the terminal can | PLAY : When power is supplied, | |||||
be selected with DC IN MODE in the SYS- |
| starts playback automatically. | ||||
TEM (2/2) Menu screen. |
|
|
| (Timer playback) | ||
● If the ) TIMER switch on the rear panel is | Memo | |||||
set to “REC” or “PLAY”, recording or playback | ● If the TIMER switch is set to “REC” or “PLAY”, | |||||
will be automatically started when power is | ||||||
supplied to the terminal. (Timer recording/ | ATE ON mode upon DC power on even when | |||||
playback) |
|
|
|
| DC IN MODE in the SYSTEM (2/2) Menu | |
&[SIGNAL GND] terminal |
|
| screen is set to “OPE OFF”. | |||
|
| ⁄[SERIAL REMOTE IN] terminal | ||||
This is the grounding terminal for signals. |
| |||||
*DC power cord clamp |
|
| (mini jack) | |||
Use this clamp to fasten the DC power cord.
([DV IN/OUT] terminal
This is the input/output terminal for IEEE1394- compliant digital signals. It is for connecting to video equipment with a DV terminal.
•To enable signal input via this terminal, set the INPUT SELECT switch located on the front panel to “DV”.
•Signals that come from this terminal are out- put regardless of the setting of the INPUT SELECT switch.
•If REPLICATION of the SYSTEM (2/2) Menu is set to DV, the REC command is output from this terminal when
•Set PB/DV IN in the SYSTEM(2/2) Menu screen according to the signal format to be input to this terminal. (NTSC or PAL)
This terminal is for connecting to the serial re- mote controller
To operate
•Set REMOTE SEL SER in the REMOTE (1/2) Menu screen to “ON” or “LOC+REM.”
ON : When the 4 REMOTE / LOCAL switch on the front panel is set to “REMOTE”, this terminal becomes effective.
LOC+REM: This terminal is effective regardless of the setting of the 4 REMOTE / LOCAL switch on the front panel.
Memo
●To use this terminal as the foot switch input,
set FOOT SW in the REMOTE (2/2) Menu screen. (☞ Page 77)
18
