JVC BR-DV6000U Registering cue-up points, Clearing registered cue-up points, Multi cue-up

PLAYBACK – Multi cue-up –

Using the time codes recorded on the tape, up to 5 points on the tape can be registered as cue-up points at the Multi Cue-up screen. The registered tape positions (cue-up points) can be searched.

8 button				RESET button
								OPERATE
Mini	MENU	DISP	RESET	PROFESSIONAL	A.DUB		REC	PLAY	PAUSE
SET button	SEARCH–	SET	SEARCH+
					EJECT		REW	STOP	FF
MIC	HOLD	BLANK	CUE UP
	PHONES	REC LEVEL					AUDIO	INPUT	REMOTE
					COUNTER MONITOR OUTPUT SELECT
					CTL	L	CH-1/2	DV
					TC	MIX	MIX	LINE
		CH-1/3	CH-2/4	BR-DV6000	UB	R	CH-3/4	Y/C	LOCAL
								(CPN)
9 button			CUE UP button		COUNTER switch

Registering cue-up points

Memo

For details on time code setting and recording:

(☞ Page 59)

Cursor

Cue-up point

Ð Ð Ð M U L T I C U E U P Ð Ð Ð Ð Ð Ð

C U E I	0 0	: 0 1 : 3 5 : 1 1
C U E 2	0 3	: 4 2	: 5 9	: 2 1
C U E 3	Ð Ð : Ð Ð : Ð Ð : Ð Ð
C U E 4	1 1	: 2 1	: 4 8	: 0 7
C U E 5	Ð Ð : Ð Ð : Ð Ð : Ð Ð
E X I T
Ò S E T Ó	: E N T R Y C U E D A T A

Ò R E S E T Ó : C L E A R C U E D A T A

Ò C U E U P Ó : E X E C U T E C U E U P

Multi Cue-up screen

1. Set the COUNTER switch to TC.

2. Load a tape with time codes recorded.

3. Press the CUE UP button.

¥The CUE UP screen appears on the monitor or the LCD.

4.Perform playback or search. At the position to be registered, set it to the STILL or STOP mode.

5.Press the 8 or 9 button to bring the cursor to the cue-up point. Press the SET button.

¥Register the time code data of the current position as a cue-up point.

¥If no tape is loaded, Ò00Ó is registered.

¥Cue-up points can be registered while the tape is being played back.

6.To register more cue-up points, repeat steps 4 and 5. Up to 5 cue-up points can be registered.

Clearing registered cue-up points

Press the 8 or 9 button to bring the cursor to the cue-up point to be cleared. Press the RESET button.

¥After a cue-up point is cleared, ÒÐ ÐÓ is displayed.

54