JVC BR-DV6000U instruction manual Audio Monitor switch, Counter switch

Memo

●For the MIX setting, noise is sometimes gen- erated. If it occurs, set it to CH-1/2 or CH-3/4.

●In the 48 K audio mode, it is fixed at chan- nels CH1 and CH2 regardless of the setting of the switch.

7[AUDIO MONITOR] switch

Use this switch to select the audio channel for output signals from the headphone terminal and the AUDIO MONITOR terminal located on the rear panel.

The output signal of the AUDIO MONITOR OUT terminal is monaural.

L: For outputting the sound of CH1.

MIX : For outputting the mixed sound of CH1 and CH2.

R: For outputting the sound of CH2.

Memo

In the following conditions, if this switch and the

6AUDIO OUTPUT switch are used in combi- nation, the AUDIO MONITOR OUT outputs the sounds listed as in the following table.

•During playback of tapes recorded in the 32 K audio mode

•In the EE mode for DV input in the 32 K audio mode

•During audio dubbing

AUDIO switch		MONITOR OUT
MONITOR	OUTPUT	output channel
	CH-1/2	CH1
L
	MIX	CH1/3 mix
	CH-3/4	CH3
	CH-1/2	CH1/2 mix
MIX
	MIX	CH1/2/3/4 mix
	CH-3/4	CH3/4 mix
	CH-1/2	CH2
R
	MIX	CH2/4 mix
	CH-3/4	CH4

8[COUNTER] switch

The switch changes the contents of the coun- ter display of the 9 LCD and the monitor. CTL : It displays the counter in hour, minute,

second and frame based on CTL (con- trol signal).

TC : It displays the time code data.

UB : It displays the user’s bit (UB).

9LCD

In the playback, still or search mode, it dis- plays the playback image.

In the recording, recording pause, stop, fast-for- warding or rewinding mode, it displays the in- put image.

The following information is also dis- played.

•Various types of information (status display), e.g., operation mode, date/time, counter

•Menu screen

•Warning display

(For details, ☞ Page 20)

Memo

●Use the *DISP button to enable/disable the LCD display and the display style.

●LCD-related settings, e.g., brightness adjust- ment of the LCD, are performed in the DIS- PLAY MENU screen.

(☞ Page 39 “Setting the LCD display”) (☞ Page 82 “DISPLAY MENU screen”)

●If the same image pattern is kept displayed on the LCD display for a prolonged period of time, “ghosting”, the permanent etching of a pattern on a display screen, may occur. To prevent this, turn off the LCD display when it is not in use.

13