BIXOLON SRP-F310/312 Smps Specifications, Smps Switching Mode Power Supply Specification, Gnd

SRP-F310/312

3-4 SMPS Specifications

3-4-1 SMPS (Switching Mode Power Supply) Specification

Item			Description	Remark
		• Typical: 100V ~ 240V AC
Input Voltage		• Min: 90V AC
		• Max: 264V ac
Input Current		• Max: 1.5A (When 120V)
Inrush Current Limiting		• Max: 30A at 115Vac input Voltage for a cold start at 25℃
		ambient conditions
Load Regulation		• +24V ±5% @ 0~2.5A Static
		• +24V +5/-10% @ 2~6.5A Dynamic
Ripple Noise		• ±200mV @ 24Vdc
		• The power supply shall not be damaged from the condition that
Short-Circuit Protection		between DC output and DC ground are shorted. An output short
		circuit is defined as output impedance of less than 300mΩ for
		greater than 1 second. The power supply will operate normally
		when this condition is removed promptly within 2 seconds.
O.V.P		• 26Vdc~30Vdc
(Over Voltage Protection)
O.T.P		• The power supply will be shutdown at an over-temperature
		condition. This shutdown shall be cleared by removal of this
(Over-temperature Protection)
		abnormal condition and input power recycling.
	Table 3-12 Power Adapter (SMPS) Specification
3-4-2 SMPS Output Connector
		Pin Number	Signal Name
		1	+24 VDC
		2	GND
		3	N.C
		Shield	Frame GND
		Table 3-13 Power Connector Pin Description

(a)(b)

Figure 3-5 SMPS DC Output Connector(a) & Printer Power Connector(b)

Rev. 1.00 - 22 -