BIXOLON SRP-F310/312 service manual AC Adapter Installation, Interface Cable Installation

SRP-F310/312

2. Installation and Operation

2-1 Installation

2-1-1 AC Adapter Installation

Figure 2-1 AC Adapter Installation

2-1-2 Interface Cable Installation

Interface Cable

Interface connector

Figure 2-2 I/F Cable Installation

1.Make sure the printer is turned off with the side of the switch.

2.Plug the power cord into the SMPS

on the printer.

3. Plug the AC Adapter power cord into the wall outlet.

1.Turn off the printer, host ECR and Computer.

2.Plug RS-232, USB or Parallel Cable connector into the I/F connector on the printer.

3.Tighten the screws on both sides of the connector.

4.Turn on the printer, host ECR and Computer.

2-1-3 USB Cable Installation

USB Connector

UAB-B Cable

Figure 2-3 USB B-TYPE Cable Installation

1.Turn the printer off.

2.Plug USB cable connector into the connector on the printer.

2-1-4 Cash Drawer Cable Installation

Figure 2-4 Cash Drawer Cable Installation

1.Turn the printer off.

2.Plug the cash drawer cable connector into the connector on the printer.

(To remove the cash drawer cable, press

the clip on the connector, grasp the connector and pull it out.)

Rev. 1.00 - 7 -