|
Interface Connector |
Figure 2-5 ETHERNET Cable Installation
1. Turn the printer off..
2. Plug the ETHERNET Cable into the connector on the printer.
|
|
Dongle Cable |
Figure 2-6 Dongle Cable Installation
1.Turn the printer off..
2.Plug the Dongle Cable into the connector on the printer.
|
Figure 2-7 Cover Open Installation
1.Turn the printer off.
2.Push the
|
Figure 2-8 Paper Roll Installation
1.Open the cover printer and remove the used paper roll core if there is one.
2.Load the paper roll on the paper holder as shown.
3.Close the cover printer.
Rev. 1.00 | - 8 - |
