SRP-F310/312
7-2 Power Problem
If a problem that can be verified by visual examination has occurred, use the tables below to determine the cause and perform repairs.
There are four tables, divided by symptom category:
•Printing Quality Problems
•Printer Mechanism Problems
•Auto cutter Mechanism Problems
The tables contains the following columns:
• Problem
This is the symptom that can be verified
• Problem Causes
This is a listing of one or several possible causes that should be examined.
•Level
-Level A
The problem can be corrected by persons who are familiar with the printer and have general knowledge, but special technical skills are not required.
- Level B
The problem requires thorough knowledge and familiarity with the printer as well as technical skills and experience.
• Checkpoint
These are one or more areas in the printer that should be checked.
• Action
These are the steps to correct the problem. If the problem persists after taking these steps, check the other possible causes listed.
Rev. 1.00 | - 64 - |
