BIXOLON SRP-F310/312 3 USB2.0 Interface, 3a Specification, 3b Signal Description, 3c Cable

SRP-F310/312

3-5-3 USB2.0 Interface

SRP-F310/312 support the USB (Universal Serial Bus) Serial Communication.

3-5-3(a) Specification

	Item		Description	Remark
Transfer Type		• BULK
Data Signal		• Bi-direction, Half-Duplex
		• Differential Signal Pair (D+ / D-)
Data Format		• NRZI Format
		• Zero Bit Stuffing after 6 ones
	Speed	• 480 Mbps
Cable & Connector		• Cable: 5m / 2m
		• Connector: B Type(Device) / A Type(Host)
		• Supports the 480 Mbps high-speed mode (HS) for
	Other	USB 2.0, as well as the 12 Mbps full-speed (FS) and
		the low-speed (LS modes) for USB 1.1
3-5-3(b) Signal Description		Table 3-18 USB Specification
Pin No.	Signal Name	Assignment(Color)	Function
Shell	Shield	Drain Wire	Frame Ground
1	VBUS	Red	Host Power: DC5[V] / 500[mA]
2	D-	White	Differential Data Line
3	D+	Green	Differential Data Line
4	GND	Black	Signal Ground
3-5-3(c) Cable		Table 3-19 USB Pin Description

USB cable consists of four conductors, two power conductors, and two signal conductors. High-/full-speed cable consists of a signaling twisted pair, VBUS, GND, and an overall shield. High-/full speed cable must be marked to indicate suitability for USB usage. High-/full-speed cable may be used with either low-speed, full-speed, or high-speed devices. When high-/full-speed cable used with low-speed devices, the cable must meet all low-speed requirements.

Low-speed recommends, but does not require the use of a cable with twisted signaling conductors.

Rev. 1.00 - 27 -