HP Laser CE527A#ABA Fuser Modes, Normal, HIGH2, HIGH1, Low, LOW1 Restore Modes, Optimize, Fastres

Item	Sub-item	Sub-item	Values	Description
FUSER MODES	A list of paper types		NORMAL	Each paper type has a default fuser
	displays.		HIGH2	mode. Change the fuser mode only if you
				are experiencing problems printing on
			HIGH1	certain paper types. After you select a
				type of paper, you can select a fuser mode
			LOW	that is available for that type.
			LOW1
	RESTORE MODES			Return all fuser-mode settings to the
				factory-default settings.
OPTIMIZE				Optimize various print modes to solve
				print-quality issues.
	RESTORE OPTIMIZE			Return all the settings in the OPTIMIZE
				menu to the factory-default values.
RESOLUTION			300	Sets the resolution at which the product
			600	prints.
				300: Produces draft print quality.
			FASTRES 1200*
				600: Produces high print quality for text.
			PRORES 1200
				FASTRES 1200: Produces 1200-dpi print
				quality for fast, high-quality printing of
				business text and graphics.
				PRORES 1200: Produces 1200-dpi print
				quality for fast, high-quality printing of line
				art and graphic images.
RET			OFF	Use the Resolution Enhancement
			LIGHT	technology (REt) setting to produce print
				with smooth angles, curves, and edges.
			MEDIUM*	REt does not affect print quality if the
			DARK	resolution is set to the FASTRES 1200 or
				PRORES 1200 settings. All other print
				resolutions benefit from REt.
ECONOMODE			OFF*	EconoMode is a feature that allows the
			ON	product to use less toner per page.
				Selecting this option extends the life of the
				toner supply and might reduce the cost
				per page. However, it also reduces print
				quality. The printed page is adequate for
				printing drafts.
				HP does not recommend full-time use of
				EconoMode. If EconoMode is used full-
				time, the toner supply might outlast the
				mechanical parts in the print cartridge. If
				print quality begins to degrade under
				these circumstances, you will need to
				install a new print cartridge, even if there
				is toner supply remaining in the cartridge.
TONER DENSITY			1 to 5	Lighten or darken the print on the page.
				The lightest setting is 1, and the darkest
				setting is 5. The default setting of 3 usually
				produces the best results.

24 Chapter 2 Control panel ENWW