HP Laser CE527A#ABA Chosen Personality not, Available, Cleaning Disk X% Complete, Code CRC Error

Table 10-1Control-panel messages (continued)

Control panel message	Description	Recommended action
CHOSEN PERSONALITY NOT	The product received a request for a	Print the job using a printer driver for a
AVAILABLE	personality (product language) that does not	different product language, or add the
To continue press OK	exist. The print job is canceled.	requested language to the product (if
		available).
		To see a list of available personalities, print a
		configuration page.
CLEANING DISK <X>% COMPLETE	The storage device is being sanitized or	No action is necessary.
Do not power off	cleaned. Do not turn off. Product functions
	are unavailable. The product automatically
alternates with	turns off and then on when finished.
CLEANING DISK <X>% COMPLETE
For help press
CLEANING PAGE ERROR	You are processing a cleaning page with the	Open the rear output bin to begin creating or
Open rear door	rear door closed.	processing the cleaning page.
CLEANING...	The product is performing an automatic	No action is necessary.
DO NOT GRAB PAPER	cleaning.
Clearing event log	The product is clearing the event log.	No action is necessary.
Clearing paper path	The product jammed or was turned on and	Wait for the product to finish trying to clear the
	paper was detected in a wrong location. The	pages. If it cannot, a jam message displays
	product is automatically attempting to eject	on the control panel.
	the pages.
CODE CRC ERROR	An error occurred during a firmware upgrade.	Contact an HP-authorized service or support
SEND RFU UPGRADE ON USB DEV PORT		provider.
DATA RECEIVED	The product is waiting for the print command.	Press the OK button to continue.
To print last page press OK
alternates with
<current status message>
DATE/TIME = YYYY/MMM/DD HH:MM	The current date and time.	Set the date and time or press the stop button
To change press OK		to skip.
To skip press
Deleting...	Product is deleting a stored job.	No action is necessary.
DUPLEX OPERATION FAILED	A timing error has occurred during a duplex	Press the OK button to continue printing. If
To continue press OK	printing job.	the error occurs again, cancel the job and
		print it as a single-sided job.
alternates with
DUPLEX OPERATION FAILED
For help press

154 Chapter 10 Solve problems ENWW