HP Laser CE527A#ABA manual Configure device menu, Printing menu

Configure device menu

Use the CONFIGURE DEVICE menu for the following tasks:

●Change the default printing settings.

●Adjust the print quality.

●Change the system configuration and I/O options.

●Reset the default settings.

Printing menu

These settings affect only jobs without identified properties. Most jobs identify all of the properties and override the values set from this menu.

To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the PRINTING menu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.

Menu item	Values		Description
COPIES	Range: 1 - 32000		Set the default number of copies for print
			jobs. The default number is 1.
DEFAULT PAPER SIZE	A list of available sizes appears.		Set the default paper size.
DEFAULT CUSTOM PAPER SIZE	●	UNIT OF MEASURE	Set the default size for any custom print job.
	●	X DIMENSION
	●	Y DIMENSION
DUPLEX	OFF*		Enable or disable two-sided printing.
	ON		NOTE: This menu is available only on the
			d, dn, and x models.
DUPLEX BINDING	LONG EDGE*		Change the binding edge for two-sided
	SHORT EDGE		printing.
			NOTE: This menu is available only on the
			d, dn, and x models.
OVERRIDE A4/LETTER	NO		Set the product to print an A4 job on letter-
	YES*		size paper when no A4 paper is loaded.
MANUAL FEED	OFF*		Makes the MANUAL FEED setting the
	ON		default for jobs that do not select a tray.
EDGE TO EDGE OVERRIDE	NO*		Change the printable area of Letter and A4-
	YES		size paper to 2 mm from the left and right
			edges for single-sided printing. The
			standard printable area is 4 mm from the
			left and right edges.

ENWW Configure device menu 21