HP Laser CE527A#ABA manual Menu, Embedded Jetdirect and EIO X Jetdirect menus

I/O menu

Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server.

For more information on these options, see Network configuration on page 65.

To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the I/

Omenu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.

Item	Sub-item	Values	Description
I/O TIMEOUT		Range: 5 - 300	Set the product I/O TIMEOUT in
			seconds. The default is 15
			seconds.
			Adjust timeout for the best
			performance. If data from other
			ports appears in the middle of your
			print job, increase the timeout
			value.

EMBEDDED JETDIRECT MENU See the next table for a list of options.

EIO <X> JETDIRECT MENU

Embedded Jetdirect and EIO <X> Jetdirect menus

Item	Sub-item	Sub-item	Values	Description
INFORMATION	PRINT SEC PAGE		YES*	YES: Prints a page that contains the current
			NO	security settings on the HP Jetdirect print
				server.
				NO: A security settings page is not printed.
TCP/IP	ENABLE		ON*	ON: Enable the TCP/IP protocol.
			OFF	OFF: Disable the TCP/IP protocol.
	HOST NAME			An alphanumeric string, up to 32 characters,
				used to identify the product. This name is
				listed on the HP Jetdirect configuration page.
				The default host name is NPIxxxxxx, where
				xxxxxx is the last six digits of the LAN
				hardware (MAC) address.

30 Chapter 2 Control panel ENWW