HP Laser CE527A#ABA manual USB Accessory Needs TOO Much Power, USB Storage Device Failure

Table 10-1Control-panel messages (continued)

Control panel message Description Recommended action

USB ACCESSORY NEEDS TOO MUCH POWER

Remove USB accessory and then turn off then on

alternates with

The USB accessory is drawing too much electrical current. Printing cannot continue.

Remove the USB accessory, and then restart the product.

Use a USB accessory that uses less power or that contains its own power supply.

USB ACCESSORY NEEDS TOO MUCH

POWER

For help press

USB accessory not recognized	The product does not support plug-and-play	With the USB accessory connected, turn the
For help press	operation for the type of USB accessory in the	product off and then on. If the message
	host USB port, or the accessory is not	reappears, remove the USB accessory.
alternates with	supported
USB accessory not recognized
To clear press OK
USB printing unavailable	The administrator has disabled printing from	Print the job from a computer that is
For help press	USB accessories.	connected to the product.
USB storage accessory removed	You have removed the USB accessory from	To print the remaining jobs, reinsert the USB
Clearing any unassociated data	the product. The product cancels any jobs	accessory and select the jobs again.
	from the accessory that are in the print queue.
USB STORAGE DEVICE FAILURE	The specified device has failed.	Press the OK button to continue.
To clear press OK
USB STORAGE FILE OPERATION FAILED	A command attempted an illogical operation.	Press the OK button to continue.
To clear press OK
USE TRAY <X> [TYPE] [SIZE]	The product did not detect the type and size	Press the OK button to accept the values in
To change press / .	of paper requested. The message shows the	the message, or press the up or down arrow
	most likely type and size available and the	/ to scroll through the available choices.
To use press OK	tray in which they are available.
USED SUPPLY IN USE	The print cartridge has been previously used.	If you believe you purchased a genuine HP
Economode disabled		supply, go to www.hp.com/go/
		anticounterfeit.
USED SUPPLY INSTALLED	The print cartridge has been previously used.	Press the OK button to use this cartridge, or
		install a new cartridge.
		If you believe you purchased a genuine HP
		supply, go to www.hp.com/go/
		anticounterfeit.

160 Chapter 10 Solve problems ENWW